Contribute
Register

[Guide] Intel DH67xx with HD3000 using Clover UEFI hotpatch

Status
Not open for further replies.
You send me still to the buyer guide link, which is alot of GPU cards listen in are totally not compatible with my CPU and my motherboard!!
 
You send me still to the buyer guide link, which is alot of GPU cards listen in are totally not compatible with my CPU and my motherboard!!

It is up to you to choose one that works with your system.
Off-topic here (this guide uses onboard HD3000 graphics).

I don't know why you think the graphics cards in the buyer's guide are not compatible with your system, as the dh67xx series has a PCIe graphics slot.
You don't even have any hardware details in your profile.
 
Code:
lspci  -v -s  $(lspci | grep ' VGA ' | cut -d" " -f 1)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    DeviceName: Intel(R) HD Graphics Device
    Subsystem: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
    Flags: bus master, fast devsel, latency 0, IRQ 33
    Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915
and with Intel® Core™ i3-2100T CPU @ 2.50GHz × 4
 
Code:
lspci  -v -s  $(lspci | grep ' VGA ' | cut -d" " -f 1)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    DeviceName: Intel(R) HD Graphics Device
    Subsystem: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
    Flags: bus master, fast devsel, latency 0, IRQ 33
    Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915
and with Intel® Core™ i3-2100T CPU @ 2.50GHz × 4

See Intel provided specifications: https://ark.intel.com/products/53423/Intel-Core-i3-2100T-Processor-3M-Cache-2_50-GHz
Intel HD2000 is not supported.

You need to add a compatible graphics card, or get a CPU with HD3000 (there are also Ivy Bridge CPUs with HD4000 that work with this board... HD4000 on 6-series requires minor tweaks though).
 
I know this on board gpu aren't supported. My question is: which gpu schould i install to work perfectly with hackintosh?

Regards
 
Are you kidding with me again???
 
Are you kidding with me again???

The buyer's guide contains a list of macOS supported graphics cards.
Up to you to make your own decisions on which card is appropriate for your uses.
If you think none of those are appropriate (I have not examined the list lately), perhaps you should look at older Buyer's guides.

Further discussion here is off-topic, as this guide is for HD3000 onboard only.

Or perhaps read some of the stickies in the Graphics forum: https://www.tonymacx86.com/forums/graphics.13/

For example:
https://www.tonymacx86.com/threads/radeon-compatibility-guide-ati-amd-graphics-cards.171291/
https://www.tonymacx86.com/threads/graphics-testing-benchmarking-chart.177227/
 
If i open own Thread, you send me to this thread. now you i should open a thread for my case?
 
If i open own Thread, you send me to this thread. now you i should open a thread for my case?

This guide is for general installation/patching/etc.... for compatible hardware as mentioned in the title of the thread.

I'm not going to cover the multitude of possibilities for dedicated graphics devices here, as such discussion is not motherboard specific anyway.
 
Status
Not open for further replies.
Back
Top