Cosmetic only. The kext (Apple provided) is not so smart about setting "model" in ioreg as corresponds to the device-id.
I could add the code to SSDT-IGPU, but would need to see your "Problem Reporting" files as per post #1.
(Coming from
ammulder's thread/guide, have had gfx problems on a system that previously worked)
Which means that Iris 6100 in NUC5i7RYH's is not handled (I don't see an entry there) ?
I will try first a Linux install to verify that my NUC works and it's not a hardware problem. Then I will try your guide again; didn't work 1st time, it's a bit confusing at places since it refers to
another guide (i.e. "post #2"), or I am not having enough coffee. Anyway, the distortion/artifacts are so severe once 10.11.5 is booted (with either ammulder's or RehabMan's way) that I can't make my way through it (keeps quitting to login screen after 20secs or seemingly whenever programs with GUI try to run). I can only work if I failsafely drop SSDTs or disable Clover injection so that IGPU driver is not registering.
Is there a way to get ioreg dump from terminal ?
NUC BIOS: 358 (latest, played with IGD Minimum Memory 64MB and 128MB, IGD Aperture Size=256MB)
Clover: 3726 (latest release)
SMBIOS: MacBookAir6,2 worked in the past, now nothing works (trying with iMac16,1, MacBookAir7.2, etc)
Kexts: nothing special, I prefer AppleIntelE1000e.kext, had problems with IntelMausiEthernet.kext in other systems when transfering big files in LAN, HackrNVMeFamily-10_11_5.kext, FakeSMC.kext (either from 6.21.1412 from hwsensors.com, or latest from RehabMan), I prefer EFI/CLOVER/kexts to /Library/extensions
MacOSX: 10.11.5 at an external USB disk (my Apple installer defaults to this, my previously working system is updated to 10.11.6 at an internal NVME SSD)
Connection: MiniHDMI to HDMI cable to a 4K TV (I use 1080P, have tried other resolutions as well)
When I have time I will try to make a proper problem report.