Contribute
Register

[Guide] Installing Yosemite 10.10.2 on the Asus X551CA-DH31(default i3 version)

Status
Not open for further replies.
Why So? CLOVER try to install the amount the EFI partition reboot to no avail ... still does not appear in the BIOS.

I would have to mount the EFI partition CLOVER to appear , and then format it to MBR ?
or you refer to the entire hard drive ?
you could shed some light on the matter ? I'm looking at forums and post installation CLOVER and I can not .

The guide in post #1 does not use Clover.

If you're attempting to use Clover, you should not be posting in this thread.

For Clover UEFI, you do not use MBR. See guide: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html
 
ok , I just would like to know the ASUS X551ca talking about this installation guide , as has been done the boot process , which I followed and chemaleon 4 'm not able to boot without the usb.
 
ok , I just would like to know the ASUS X551ca talking about this installation guide , as has been done the boot process , which I followed and chemaleon 4 'm not able to boot without the usb.

Most ASUS machines will not boot to GPT in legacy mode, hence the suggestion for Clover UEFI.
 
I managed to make the EFI boot but does not advance this point
11052037_699631896812865_3600200882109352846_n.jpg
i have it in config.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ACPI</key>
<dict>
<key>DSDT</key>
<dict>
<key>Debug</key>
<false/>
<key>DropOEM_DSM</key>
<false/>
<key>ReuseFFFF</key>
<false/>
</dict>
<key>SSDT</key>
<dict>
<key>DropOem</key>
<false/>
<key>Generate</key>
<dict>
<key>CStates</key>
<false/>
<key>PStates</key>
<false/>
</dict>
</dict>
</dict>
<key>Boot</key>
<dict>
<key>Log</key>
<false/>
<key>Secure</key>
<false/>
<key>Timeout</key>
<integer>5</integer>
<key>XMPDetection</key>
<string>Yes</string>
</dict>
<key>Devices</key>
<dict>
<key>USB</key>
<dict>
<key>FixOwnership</key>
<true/>
<key>Inject</key>
<true/>
</dict>
</dict>
<key>GUI</key>
<dict>
<key>Mouse</key>
<dict>
<key>DoubleClick</key>
<integer>500</integer>
<key>Enabled</key>
<false/>
<key>Mirror</key>
<false/>
<key>Speed</key>
<integer>8</integer>
</dict>
<key>Scan</key>
<true/>
</dict>
<key>Graphics</key>
<dict>
<key>DualLink</key>
<integer>1</integer>
<key>Inject</key>
<dict>
<key>ATI</key>
<false/>
<key>Intel</key>
<true/>
<key>NVidia</key>
<false/>
</dict>
<key>NVCAP</key>
<string>0000000000000000000000000000000000000000000000000000</string>
<key>VRAM</key>
<integer>0</integer>
<key>VideoPorts</key>
<integer>0</integer>
<key>display-cfg</key>
<string>00000000000000000000000000</string>
<key>ig-platform-id</key>
<string>0x01660003</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>AppleRTC</key>
<true/>
</dict>
<key>SMBIOS</key>
<dict>
<key>Trust</key>
<false/>
</dict>
</dict>
</plist>
 
I managed to make the EFI boot but does not advance this point

"Waiting for DSMOS" without a corresponding "DSMOS has arrived" implies that FakeSMC is missing or not loading.
 
rehabman the matter is that I have two weeks trying to do a clean boot . but I can not.
but I have clover fails and fails. as I can put on my ASUS X551ca chameleon ? I have already tried and not succeeded
now I just start my hack with usb instalcion Unibeast yosemite
 
Hate to be late to the party..But, I looked over the tutorial page for Clover UEFI installation and I'm still confused as to whether I can install this on my non UEFI bios. I have the same model as OP but tried installing Clover EFI a while ago with no avail.

Thanks
 
Hate to be late to the party..But, I looked over the tutorial page for Clover UEFI installation and I'm still confused as to whether I can install this on my non UEFI bios. I have the same model as OP but tried installing Clover EFI a while ago with no avail.

Thanks

Check to see if you have a BIOS upgrade available...

If not, you can still use Clover but install for legacy instead of UEFI (only slight changes in the options when you install).

Note: Guide in post #1 is for Unibeast/Chimera.

Most ASUS machines will not boot legacy to a GPT drive, thus why Clover UEFI is recommended. But if you don't have UEFI boot and cannot get it from a BIOS upgrade, then you have to go legacy.
 
To download Clover on this laptop you need to download the BIOS tab | add a new boot option | The path to the boot options |
register: EFI \ BOOT \ BOOTX64.EFI and you boot Clover.
 
Status
Not open for further replies.
Back
Top