Contribute
Register

[Guide] Installing Yosemite 10.10.2 on the Asus X551CA-DH31(default i3 version)

Status
Not open for further replies.
Hi there,
I followed your guide, and when I try to boot, I get to the Apple screen with a progress bar at the bottom, but it doesnt fill, so when I try booting into verbose mode, I get a kernel panic.
Any ideas how I can fix it?
Thanks

PS. This is the kernel panic I get when I boot in verbose mode:
View attachment 127467

You need patched AppleIntelCPUPowerManagement.kext.

See guide: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html
 
How did you manage to install Yosemite on mbr without patching installation files?

Best to avoid MBR and use Clover UEFI.

But you can install to GPT and convert to MBR (Linux gdisk).
 
Can't manage uefi boot in bios... There is no such option in bios
Followed your guide on installing clover (thanx), boot OK from usb...
I have the same laptop like OP. [h=1]ASUS X551CA [/h]

You probably need to add Clover to the UEFI entries in BIOS.

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
 
Ater ten hours hackintoshing my laptop is dead. I bought it yesterday. It's new one, warranty etc. I think hdd stop working. Never mind, it was passionate ten hours. Big fun. And, of course, I'll continue on new one soon. It's 6h 17 min AM in Macedonia, I haven't sleep from yesterday morning... Thank you for your help.
Good morning - Good night.
 
achievement do not Boot after installation. BIOS will not let me choose the HD
the chameleon not start, just boot the USB
my pendrive UEFI, CDrom but not the hard disk appears.


I Unable Security mode
Unable FastBoot
CSM Enable Launch


as solved?
 
achievement do not Boot after installation. BIOS will not let me choose the HD
the chameleon not start, just boot the USB
my pendrive UEFI, CDrom but not the hard disk appears.


I Unable Security mode
Unable FastBoot
CSM Enable Launch


as solved?

You need to convert your disk to MBR (use Linux gdisk).
 
Why So? CLOVER try to install the amount the EFI partition reboot to no avail ... still does not appear in the BIOS.

I would have to mount the EFI partition CLOVER to appear , and then format it to MBR ?
or you refer to the entire hard drive ?
you could shed some light on the matter ? I'm looking at forums and post installation CLOVER and I can not .
 
Status
Not open for further replies.
Back
Top