- Joined
- Mar 16, 2019
- Messages
- 7
- Motherboard
- INtel NUC 8i3BEH
- CPU
- i3-8109u
- Graphics
- Iris Plus 655
- Mac
970 nvme m2 (not the plus model) that's what meant. thanks
picture of verbose mode where it hangs.
busy timeout[1], 240s: 'AppleACPICPU'
In addition to Samsung 870 nvme m2 (OS resides in this SSD) and a Samsung 860 SSD in SATA as apple backup.
thanks
I went back and looked at step 6. After that point you still need to boot from the USB drive but then select osx install from your hard drive from the boot loader screen.
Success
Almost everything works except for the Wifi (not needed, Ethernet is OK)
Thank you
update your clover version to latest via sourceforgeHi all,
I had previously succeeded in installing Mac OSX 10.14.3 on my NUC8i5BEH.
I had some problems with it and decided to reinstall. Now attempting to install 10.14.4. I am getting stuck at the end of 8. Installation animation finishes but never boots to desktop. It just hangs there forever.
Using Bios 56 as I did in previous install. Using Rehabman's Clover.
Wondering if
1) I am doing something wrong
2) Bios needs to be downgraded?
3) Need to use different clover version
Any help much appreciated. Attached Verbose and Clover folder.
Thanks, I've tried that but did not have any luck. Although I could not find an exact match to the instructions given by @Cric with @RehabMan version of Clover in this guide :update your clover version to latest via sourceforge
here:Thanks, I've tried that but did not have any luck. Although I could not find an exact match to the instructions given by @Cric with @RehabMan version of Clover in this guide :
"Run the Clover Installer package:
- select the target of the install to "CLOVER EFI" using "Change Install Location"
- select "Customize" (the default is a legacy install -- we need to change it)
- check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
- check "BGM" from Themes (the config.plist files I provide use this theme)
- the defaults for Drivers64UEFI are recommended"
Perhaps I am not checking the right boxes.
If ever you updated instructions for the Sourceforge version of Clover, would really help (or share the Clover folder in questions)!
Many thanks.
OK I actually got it to work by copying @LittleBlack 's EFI folder and overwriting mine on my USB.