[Guide] Installing macOS Mojave (10.14.2) on Intel NUCi5BEH using Clover UEFI + updating to Mojave (10.14.6) on post#2

[Leesureone]

Thanks for the reply.
Did you mean that remove the kexts and try again? When should i add them back?
Thanks~

Please update your signature to show your hardware, what are you working with? Also what version of OSX are you trying to load, it makes a difference. Mojave 14.4? 14.5? Lower? FYI, its not hanging on the network driver, there are several lines of information after that entry, it's hanging on APFS module which can mean a few different things. What version bios are you running? Above 56 and using Rehabmans clover.plist will cause it to hang on install. Or sometimes it may mean you have Secure Boot Enabled in the bios which you would have to change to disabled. Again if you are using the "git" downloads from Rehabman the version of clover may need to be updated if you are trying to load above Mojave 14.3. More information needed to have a better idea. There are a few EFI folders posted in this thread that have updated clover and bios fixes for above 56. Mine is attached to post 333 in this thread one page back, just copy it and replace your EFI Folder on your USB drive ad try again.

 

[UCDuan]

Please update your signature to show your hardware, what are you working with? Also what version of OSX are you trying to load, it makes a difference. Mojave 14.4? 14.5? Lower? FYI, its not hanging on the network driver, there are several lines of information after that entry, it's hanging on APFS module which can mean a few different things. What version bios are you running? Above 56 and using Rehabmans clover.plist will cause it to hang on install. Or sometimes it may mean you have Secure Boot Enabled in the bios which you would have to change to disabled. Again if you are using the "git" downloads from Rehabman the version of clover may need to be updated if you are trying to load above Mojave 14.3. More information needed to have a better idea. There are a few EFI folders posted in this thread that have updated clover and bios fixes for above 56. Mine is attached to post 333 in this thread one page back, just copy it and replace your EFI Folder on your USB drive ad try again.


Sorry, the network driver is not the issue, he means remove it from your clover folder on your USB drive and try booting again but I don't see that doing anything for you. Easy to try though.

Yes my bios version is not 56. Thanks. I will try your EFI files.

 

[UCDuan]

Please update your signature to show your hardware, what are you working with? Also what version of OSX are you trying to load, it makes a difference. Mojave 14.4? 14.5? Lower? FYI, its not hanging on the network driver, there are several lines of information after that entry, it's hanging on APFS module which can mean a few different things. What version bios are you running? Above 56 and using Rehabmans clover.plist will cause it to hang on install. Or sometimes it may mean you have Secure Boot Enabled in the bios which you would have to change to disabled. Again if you are using the "git" downloads from Rehabman the version of clover may need to be updated if you are trying to load above Mojave 14.3. More information needed to have a better idea. There are a few EFI folders posted in this thread that have updated clover and bios fixes for above 56. Mine is attached to post 333 in this thread one page back, just copy it and replace your EFI Folder on your USB drive ad try again.


Sorry, the network driver is not the issue, he means remove it from your clover folder on your USB drive and try booting again but I don't see that doing anything for you. Easy to try though.

Thanks for your help. But there is another error.

When I boot from my SSD, it stucks with the ioconsoleusers gioscreenlockstate 3 message. Could you help me with that?

Thanks.

 

[Leesureone]

Thanks for your help. But there is another error.

When I boot from my SSD, it stucks with the ioconsoleusers gioscreenlockstate 3 message. Could you help me with that?

Thanks.

What hardware are you using? The error message is apparently related to Nvidia or video display which should not be an issue

 

[UCDuan]

What hardware are you using? The error message is apparently related to Nvidia video display which should not be an issue

The nuc8i5 and 16G memory. SSD is from Samsung. There is no video card. It should be quite normal.

 

[Leesureone]

The nuc8i5 and 16G memory. SSD is from Samsung. There is no video card. It should be quite normal.

Its not an 970 EVO plus ssd is it?

 

[UCDuan]

What hardware are you using? The error message is apparently related to Nvidia or video display which should not be an issue

The message is the following.

And it takes a long time to get there. Is that normal?

 

[UCDuan]

Its not an 970 EVO plus ssd is it?

No. It is SM961

 

[Leesureone]

No. It is SM961

Okay, its probably still related to the version of clover although I'm not sure why. You can download the latest version and install it with your usb boot drive as the target. Once it's done make sure the same UEFI64drivers and kexts/ Other in the EFI file I uploaded are present and try again. Welcome to hackintoshing!

 

[UCDuan]

Okay, its probably still related to the version of clover although I'm not sure why. You can download the latest version and install it with your usb boot drive as the target. Once it's done make sure the same UEFI64drivers and kexts/ Other in the EFI file I uploaded are present and try again. Welcome to hackintoshing!

I am using the latest version from RehabMan's link. Is there any newer version?

Thanks!