[Guide] Install 10.11 on HP EliteBook/ProBook/others with Clover UEFI

[antonioj07]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

No idea which WiFi card you have. You didn't mention it.

But it clearly has no BT, right?

If you don't want to listen to advice, that's your choice.

It's a compatible wifi only card, don't remember the model. All I was asking is if there is a way to make usb based BT adapters to work, I'm not ignoring you're advice per se

 

[RehabMan]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

It's a compatible wifi only card, don't remember the model. All I was asking is if there is a way to make usb based BT adapters to work, I'm not ignoring you're advice per se

No experience with USB BT adapters. Using a compatible combo WiFi/BT card via PCIe is the best way.

Not interested in investigating ways that are not "best practice"...

 

[ltdrifter]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Used this guide to install current release of 10.11 on a Probook 4530s w/ a QM2670, 8GB RAM, 500 GB mechanical hard drive. Followed instructions to the letter and...

Flawless installation, everything works.

Thanks much.

(figured y'all might be tired of "why don't my stuff work" posts)

 

[RehabMan]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Used this guide to install current release of 10.11 on a Probook 4530s w/ a QM2670, 8GB RAM, 500 GB mechanical hard drive. Followed instructions to the letter and...

Flawless installation, everything works.

Thanks much.

(figured y'all might be tired of "why don't my stuff work" posts)

Yay!

 

[bonymac]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Repair permissions is gone from 10.11. Make sure the permissions aren't wrong in the first place.

Easy enough to do if you install the kexts properly in the first place (eg. use a kext installer).

You must disable SIP in order to install unsigned/patched kexts.

Thanks rehabman
I'm on a ProBook 4530s
I used the probook installer kexts, (which I've always done pre-el capitan (then repair permissions)
How would you go about installing the audio drivers in el capitan?

 

[rokipat]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

hi, i did newinstall el captain on 6460b (before Yosemite worked fine), after I installed hp pro book installer with all setting I make an restart. After start clover is load properly and choose boot OS X from my ssd. I can see the apple logo and loading status but in about 3/4 of loading stattus display going be black...

what I do wrong?!

 

[RehabMan]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

hi, i did newinstall el captain on 6460b (before Yosemite worked fine), after I installed hp pro book installer with all setting I make an restart. After start clover is load properly and choose boot OS X from my ssd. I can see the apple logo and loading status but in about 3/4 of loading stattus display going be black...

what I do wrong?!

Did you press your brightness up key?

 

[rokipat]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Did you press your brightness up key?

Yes, that was my first idea. I startet again regular via sub stick and its works via usb clover fine. Tried also than to activate fn shortcuts but there is no possibility for that :/

 

[RehabMan]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Yes, that was my first idea. I startet again regular via sub stick and its works via usb clover fine. Tried also than to activate fn shortcuts but there is no possibility for that :/

Post EFI/Clover folder.

 

[rokipat]

[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

View attachment CLOVER.zip

Post EFI/Clover folder.