Contribute
Register

[Guide] Install 10.11 on HP EliteBook/ProBook/others with Clover UEFI

Status
Not open for further replies.

RehabMan

Moderator
Joined
May 3, 2012
Messages
184,623
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Well it does give you a good indication about the power (W) usage though. But agree for more detailed information regarding P,C-States it's not the best. I installed the Intel Power Gadget and can at least verify the scaling.

But thanks for the hint about the kext I didn't know about it yet.

FakeSMC_CPUSensors.kext does not work with Broadwell.

I'll fix it when I get a Broadwell computer.

But still, it is not accurate enough to test pstates. And furthermore, it interferes with correct PM due to the inefficiencies in the code.
 
Joined
Aug 6, 2015
Messages
174
Motherboard
HP EliteBook 850 G5
CPU
i5-8350U
Graphics
UHD 620
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

OSX 10.11.1 Public Beta 1 works here without reinstalling PBI CE.
 
Joined
May 14, 2013
Messages
38
Motherboard
I didn't read
CPU
the RULES
Graphics
so ignore me
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

OSX 10.11.1 Public Beta 1 works here without reinstalling PBI CE.

After the update, I was unable to boot for some reason the BIOS didn't recognize CLOVER anymore. Maybe just a temporary issue then in my case - I did boot using the install usb stick, the setup completed and then run PBI-CE with [] Clover Install only. Rebooted, everything fine.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
184,623
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

OSX 10.11.1 Public Beta 1 works here without reinstalling PBI CE.

When PBI-CE is complete for 10.11, you will need to run it again, post install.

Or remove BrcmPatchRAM.kext manually, install BrcmPatchRAM2.kext.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
184,623
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

After the update, I was unable to boot for some reason the BIOS didn't recognize CLOVER anymore.

Normal. Ignore it.
 
Joined
May 14, 2013
Messages
38
Motherboard
I didn't read
CPU
the RULES
Graphics
so ignore me
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

When PBI-CE is complete for 10.11, you will need to run it again, post install.

Or remove BrcmPatchRAM.kext manually, install BrcmPatchRAM2.kext.

Done, also replaced BrcmBluetoothInjector.kext - just to be sure.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
184,623
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Done, also replaced BrcmBluetoothInjector.kext - just to be sure.

Just to clarify... a person updating from 10.10 to 10.11 will not have BrcmBluetoothInjector.kext installed.
 
Joined
May 14, 2013
Messages
38
Motherboard
I didn't read
CPU
the RULES
Graphics
so ignore me
HP Probook Installer Clover Edition

I just replaced the WiFi + BT module on my HP 450 G2 and WiFi works fine. However I don't see any BT hardware device. Anything I need to do in order to get it working. The module is a BCM94352HMB and I do have the attached BrcmBluetoothInjector.kext in the clover/kext/10.11 folder.

View attachment BrcmBluetoothInjector.kext.zip
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
184,623
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
HP Probook Installer Clover Edition

I just replaced the WiFi + BT module on my HP 450 G2 and WiFi works fine. However I don't see any BT hardware device. Anything I need to do in order to get it working. The module is a BCM94352HMB and I do have the attached BrcmBluetoothInjector.kext in the clover/kext/10.11 folder.

View attachment 152769

Remove BrcmBluetoothInjector.kext.

Install BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext: https://github.com/RehabMan/OS-X-BrcmPatchRAM

Also, I will move your post to the appropriate thread (this thread is for Yosemite). Done.
 
Joined
May 14, 2013
Messages
38
Motherboard
I didn't read
CPU
the RULES
Graphics
so ignore me
[Guide] Install 10.11 beta on HP EliteBook/ProBook/others with Clover UEFI

Remove BrcmBluetoothInjector.kext.

Install BrcmPatchRAM2.kext and BrcmFirmwareRepo.kext: https://github.com/RehabMan/OS-X-BrcmPatchRAM

Also, I will move your post to the appropriate thread (this thread is for Yosemite). Done.

Alright thanks - by the way, this patch worked for enabling 5GHz:
Code:
[COLOR=#000000]sudo perl -pi -e 's|\x01\x58\x54|\x01\x58\x58|g' /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortBrcm4360.kext/Contents/MacOS/AirPortBrcm4360[/COLOR]


This should be done through Clover I know, but maybe it's not necessary anymore with your updated kexts - I will report back.

/edit: I put both new kexts to the Clover 10.11 kext folder, however BT is not showing in system report.
 
Status
Not open for further replies.
Top