@darthsian where and how do you see this data?Hello, I have the opposite behavior. With iMacPro1,1 after boot i have 800MHz and when i play video on the You Tube it drops to 500MHz. After video was closed, it jumps back to 800MHz. It starts acting like that from Catalina 10.15.3. Weird.
You may want to check into this thread.Followed the guide on first page of thread, ond browsed the thread a bit.
I have a compact i7-8850H based eGlobal S200, connected a 5600 XT through a NVMe -> PCIe x4 adapter. Works great in Windows. But gaming in OS X and it crashed with hot graphics card with slow spinning fans. Running 10.15.3
I used the auto-tool to inject adjusted values in my config.plist and changed the path to match the PCI 0,6,0 stuff I found in Windows, and the new properties are together with all the other 5600 XT properties. So PCI path is correct.
But, HWMonitor2 shows only VRAM, used VRAM, and Utilization. All other values are 0. So something wrong. How do I get the system to monitor the temps and fan ?
PS: I have no IOAccelerator option in HWMonitor2, only IOKit monitoring, and it does not change anything
Added the stuff from there. Still no temp and fan speed.You may want to check into this thread.
AMD Radeon Performance Enhanced SSDT
Try this one. Hi! I have Vega 64 in Slot 1 and Vega 56 in Slot 2, do i need ssdt for Vega 56?www.tonymacx86.com
Im using this app - HWMonitorSMC2@darthsian where and how do you see this data?
Injection of Device Properties for Power and Fan control
Last updated 14th May 2019
Devices/Properties
field in clover but with no luck. The minimal example I have is <key>Devices</key>
<dict>
<key>Properties</key>
<dict>
<key>PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)</key>
<dict>
<key>AAPL,slot-name</key>
<string>Slot-1</string>
<key>ATY,FamilyName</key>
<string>Radeon Pro</string>
<key>PP_DisableClockStretcher</key>
<integer>1</integer>
<key>PP_DisablePowerContainment</key>
<integer>1</integer>
<key>PP_PhmSoftPowerPlayTable</key>
<data>
pwIIAQBcAO8GAAAOLAAAGwBIAAAAgKkDAPBJAgAUAAgA
AAAAAAAAAAAAAAAAAAIBXABAAjcClACPAbQAHgF6AIwA
rQEAAAAAYwIAAJAAmQJeATQBiAFoNgIAcQICAgAAAAAA
AAgAAAAAAAAABQAHAAMABQAAAAAAAAABCCADUgNrA4QD
mAOsA8ADzwMBAbYDAQGEAwAGYOoAAABAGQEAAdxKAQAC
AHcBAAOQkQEABWywAQAHAQjQTAEAAACAAAAAAAAAGHMB
AAEAAAAAAAAAAHS3AQACAAAAAAAAAACE3gEAAwAAAAAA
AAAAlAUCAAQAAAAAAAAAAKQsAgAFAAAAAAEAAAC0UwIA
BgAAAAABAAAAAHECAAcAAAAAAQAAAAAEYOoAAABAGQEA
ANxKAQAAkF8BAAAACChuAAAALMkAAAH4CwEAAoA4AQAD
kF8BAAT0kQEABdCwAQAGwNQBAAcACGw5AAAAJF4AAAH8
hQAAAqy8AAADNNAAAARobgEABQiXAQAG7KMBAAcAAWg8
AQAAAQSAOAEAAAAAgDgBAAAAAIA4AQABAACQXwEAAgAA
AQgAmIUAAEC1AABg6gAAUMMAAAGAuwAAYOoAAJQLAQBQ
wwAAAnj/AABAGQEAtCcBAFDDAAADtCcBANxKAQDcSgEA
UMMAAASAOAEAkF8BANxKAQBQwwAABdxKAQAAdwEAkF8B
AFDDAAAGAHcBAAB3AQCQXwEAUMMAAAcAdwEAkJEBAAB3
AQBQwwAAARgAAAAAAAAAC4gT6AMoCkYACgBUA5ABkAGQ
AZABkAGQAZABAAAAAAACCjEHpQClAKUALAEAAFkAaQBK
AEoAXwBzAHMAZABAAJCSl2CWAJBVAAAAAAAAAAAAAAAA
AAAAAAACAtQwAAACEGDqAAACEA==
</data>
</dict>
@jaymonkey @pastrychef
Gents.. I am running a DX58so W3680 (very close hardware match to macpro5,1) and VEGA and have struggled getting things bullet proof like it was under ElCap with a 660
currently I have the VEGA56 working about as best as I think I can get it using a split smbios personallity.
I use to use smbios macpro5,1 with WEG/LILU pikera/boardid imacpro/shikigva=80 and that got me the typical 264 hardware enc/dec with hevc dec
I am now using a split personality in clover with all the 5,1 smbios features, sn, etc but using the iMac Pro board-id here instead of injecting with WEG... this gets me BOTH enc/dec in BOTH 264/hevc
I can't use a straight iMac Pro smbios it breaks everything else, sleep, CPU won't step or clock, basically I need the kernel running this board as a 5,1 and i need the frameworks of a 1,1 or something more compatible with the VEGA to get the best of both worlds
The only issue I can't solve is this...
I can only boot with my 4k TV on DP1.. if I try and boot with just the HDMI monitor or in any way have HDMI on it will black screen. If I boot with just the DP 4k, get to desktop and turn on the HDMI monitor, black screen and console spams gpu.restarts, system unresponsive, can't even ssh in anymore (use to work until sometime past 10.14.5)
I need to boot with just the DP monitor, sleep/wake and then I can use both monitors and future sleep/wakes generally work
so on mojave 10.14.6 2020-002, using clover 5115, WEG-LILU-ALC lastest and the above configs.. any changes or improvements I can make ... any breakthroughs I have not been able to find?
I would love to be able to ditch WEG and use either a SSDT and or clover Device property injection but nothing has been able to get me sleep, wake, power management, hardware enc/dec on both codecs and ability to stream at least DRM amazon prime.. have not tested other DRM?
thanks guys
also I have looked at several of the latest RADEONBOOST type kexts.. and have a question about the AGPM ... for Mac Pro, the control-id is 18 while iMac Pro is 17 while both have a max/min power state of 15/0 .. any ideas exactly what the control-id diff is> I would think that while the power stepping appear the 'same' that master control-id probably sets a more restricted power profile for the more tightly enclosed and apple specific VEGA implementation ...
also, and I guess this should be obvious but injecting board-id with WEG is not the same as changing board-id with clover smbios.. WEG is just using it for certain frameworks I think while injecting board-id with smbios(clover) uses it more system wide.. and hence manages to get hardware accelerated hevc encoding .. only way I have done it.. BUT changing the board id DOES CHANGE my iMessage keys and while the system identifies itself as a Mac Pro to cloud services, its also showing a iMac board id... so that kicked my iMessage until I logged out and back in.. SEEMs to be holding for now..
opencore is different again.. as you get the benefits of the clover injection method but from what I have read, doesn't seem to show up external in like iMessage keys.. but I can't use open core, I have a very heavily modded DSDT that I can't inject with open core and trying to figure out all those changes using find/replace.. plus I don't think I have the grey matter or patience at this point to learn open core.. plus it really doest not seem like it was build for really old legacy hardware like x58 westmere
thanks p-chef... yeah.. hacky... that pretty much amplified hackintoshing on really OLD hardware .. a hack on a hackSorry. I have no idea how to get video out ports working for your setup. I've never even tried using the WhateverGreen features to spoof iMacPro for DRM. I found it too "hacky" for my taste. I've also never tried mixing and matching board-id with different system definitions for the same reason.