Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
Followed Rehabmans guide in 2022 with all the recommended files, pre-isntall and install to
make fresh new 10.14.6 usb installer, works
and fresh clean new 10.14.6 install, works

post install
followed rehabmans guide for post install
didnt boot. reboot loop.

updated to clover v5102 on usb and pc
copied all files in original efi/clover/* made by rehabmans guide to the new v5102 clover/drivers, /kexts
no audio, no track pad, no wifi.

can see the *.efi *.kexts with -64 on end of filename corelate to the files created by new clover version 5102, is the bootloader double loading 2 versions of the same files. delete the old files made with rehabmans guide, with -64 at the end?


someone also did a recent fresh new usb installer and fresh new clean install?
solved?

thanks

 
Followed Rehabmans guide in 2022 with all the recommended files, pre-isntall and install to
make fresh new 10.14.6 usb installer, works
and fresh clean new 10.14.6 install, works

post install
followed rehabmans guide for post install
didnt boot. reboot loop.

updated to clover v5102 on usb and pc
copied all files in original efi/clover/* made by rehabmans guide to the new v5102 clover/drivers, /kexts
no audio, no track pad, no wifi.

can see the *.efi *.kexts with -64 on end of filename corelate to the files created by new clover version 5102, is the bootloader double loading 2 versions of the same files. delete the old files made with rehabmans guide, with -64 at the end?


someone also did a recent fresh new usb installer and fresh new clean install?
solved?

thanks
for trackpad and mouse use rehabmans voodoops2controller version 1.9.1,
for audio try acidanthera's applealc 1.7.1 with the boot argument -applbklbeta,
also try clover 5119
What wifi card do you have?
 
for audio try acidanthera's applealc 1.7.1 with the boot argument -applbklbeta,

thanks, im still a noob begginer also i read the opencore guide at least 8 times. still beginner.

put the boot switch text somewhere in config.plist ?

rehabmans post install guide downloaded that applealc 1.7.1 - cool to see

also try clover 5119
make backup copy of current (5102 or original rehabman clover 4701) efi (with all rehabmans guide post install patching etc) ?

delete the EFI.?

use clover 5119 to make new efi?

copy the files from original efi to new efi made by clover 5119?

What wifi card do you have?
the one recommended by rehabman bcm in op
 
thanks, im still a noob begginer also i read the opencore guide at least 8 times. still beginner.

put the boot switch text somewhere in config.plist ?

rehabmans post install guide downloaded that applealc 1.7.1 - cool to see


make backup copy of current (5102 or original rehabman clover 4701) efi (with all rehabmans guide post install patching etc) ?

delete the EFI.?

use clover 5119 to make new efi?

copy the files from original efi to new efi made by clover 5119?


the one recommended by rehabman bcm in op
i use xplist app to alter config.plist as it's an opensource app "see pic"

"delete the EFI.?

use clover 5119 to make new efi?

copy the files from original efi to new efi made by clover 5119?" yes
 

Attachments

  • Screen Shot 2022-06-03 at 05.24.57.png
    Screen Shot 2022-06-03 at 05.24.57.png
    66.4 KB · Views: 19
i use xplist app to alter config.plist as it's an opensource app "see pic"

"delete the EFI.?

use clover 5119 to make new efi?

copy the files from original efi to new efi made by clover 5119?" yes

thanks will search.brave.com for it




./install_acpi.sh install_4x40s_hires RM

maybe if theres a bug if the RM switch is used? not sure how to undo to test

"./install_acpi.sh install_8x0g1G1_haswell RM"

"./install_acpi.sh install_8x0g1_haswell"


As I write this, current content:
Code:
config_1020_G1_Broadwell.plist config_4x0_G4_Kabylake.plist config_8x0_G4_Kabylake.plist
config_1030_G1_Skylake.plist config_4x0_G5_Kabylake-R.plist config_8x60p.plist
config_1040_G1_Haswell.plist config_4x30.plist config_8x70p.plist
config_1040_G3_Skylake.plist config_4x40.plist config_9x70m.plist
config_1050_G1_KabyLake-R.plist config_5x30m.plist config_9x80m.plist
config_2x60p.plist config_6x0_G1_Haswell.plist config_ZBook_G0.plist
config_2x70p.plist config_6x0_G2_Skylake.plist config_ZBook_G1_Haswell.plist
config_3x0_G1.plist config_6x60p.plist config_ZBook_G2_Broadwell.plist
config_4x0_G0.plist config_6x70p.plist config_ZBook_G2_Haswell.plist
config_4x0_G1_Haswell.plist config_8x0_G1_Haswell.plist config_ZBook_G2_Haswell_ALC280.plist
config_4x0_G1_Ivy.plist config_8x0_G1_Ivy.plist config_ZBook_G3_Skylake.plist
config_4x0_G2_Broadwell.plist config_8x0_G2_Broadwell.plist readme.txt
config_4x0_G2_Haswell.plist config_8x0_G2_Haswell.plist
config_4x0_G3_Skylake.plist config_8x0_G3_Skylake.plist
Copy the appropriate plist for your hardware to EFI/Clover/config.plist on your EFI partition.
 
for wifi you need probookatheros.kext in efi/clover/kexts others and also airportatheros40.kext in Library/extensions
Also if you want bluetoooth, you need some more kexts
 
I should warn you, you will probably get some slight artifacts/graphics glitches with mojave or catalina, although I had both fully working I've gone back to High Sierra for the moment
 
thanks will search.brave.com for it






maybe if theres a bug if the RM switch is used? not sure how to undo to test

"./install_acpi.sh install_8x0g1G1_haswell RM"

"./install_acpi.sh install_8x0g1_haswell"
look in folder your user name/project/hotpatch and copy to efi/clover/acpi/patched
 
I should warn you, you will probably get some slight artifacts/graphics glitches with mojave or catalina, although I had both fully working I've gone back to High Sierra for the moment
agree - mojave 10.14.6 to be exact

tested clean install with clover 4920, completed the post install guide of rehabman

the clover boot screen is messed. can just see enough text to pick what to boot.

can only see

root device uuid is...
end initbootstruct
start load ramdisk
end loadramdisk
startrandomseed
end randomseed

long boot time. after a longer than usual wait for boot 5 mins. made it past login screen

wifi bt appears to work.

filevault works very slow wait for encrypting to finish.

for audio try acidanthera's applealc 1.7.1 with the boot argument -applbklbeta,

thanks tried it again. just the audio not working. greyed out in menu bar.




followed the science again in 2022. Rehabmans guide with some mods.





for wifi you need probookatheros.kext in efi/clover/kexts others and also airportatheros40.kext in Library/extensions
Also if you want bluetoooth, you need some more kexts

thanks. testing with usb lan to get the xcode-select install working

next trying clover v5119.
 
Last edited:
agree - mojave 10.14.6 to be exact

tested clean install with clover 4920, completed the post install guide of rehabman

the clover boot screen is messed. can just see enough text to pick what to boot.

can only see

root device uuid is...
end initbootstruct
start load ramdisk
end loadramdisk
startrandomseed
end randomseed

after a longer than usual wait for boot 5 mins. made it past login screen

wifi bt appears to work.

filevault works very slow wait for encrypting to finish.

just the audio not working. greyed out in menu bar.


followed the science again in 2022. Rehabmans guide with some mods.







thanks. testing with usb lan to get the xcode-select install working
This might help but remember this is for my 4530s
 

Attachments

  • EFI.zip
    19.2 MB · Views: 83
Status
Not open for further replies.
Back
Top