Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
I need some help troubleshooting to see if i bought a defective card or is not compatible with my laptop?

I have a HP Elitebook 850 g1. I replaced the intel Wifi+BT half size mini with a BCM943225HMB AW-NB290. Wifi works fine in Windows, Ubuntu, and Catalina. None of the OSes can see the BT device. Windows doesn't see the device at all, Ubuntu (lsusb) doesn't show it, Catalina doesn't show it under USB in ioreg.

Did I some how got a version of this card without BT?
That is the "b" in the end . I did buy some without the B once, not such a big deal as its quite buggy usually when used with 2.4ghz wifi networks. It could also be that you disabled it in Bios!
 
My bios only have an entry for Embedded Wireless. There are no seperate Bluetooth settings. I thought the card without the "B" doesn't have bluetooth and the one with the "B" is a combo card WIFI+BT. I didn't know about the 2.4ghz bug though.

If I follow this guy and use Rehabman patches, can I assume that USB port injection is configured correctly?
 
I bought a DW1550 which works flawlessly.
 
Guys, I have a Catalina 10.15.2 install from this guide.

The problem is that Sleep work perfectly when I press it in menu (Apple logo).
But it won't sleep automatically when I leave it on batter for some time.

In 10.15.1 it was working perfectly, 2-3 minutes on batter and laptop is asleep.

Any tips?

My pmset -g
Code:
Currently in use:
standby              0
womp                 0
halfdim              1
hibernatefile        /var/vm/sleepimage
powernap             0
gpuswitch            2
networkoversleep     0
disksleep            0
standbydelayhigh     86400
sleep                0 (sleep prevented by coreaudiod, configd)
autopoweroffdelay    28800
hibernatemode        0
autopoweroff         1
ttyskeepawake        1
displaysleep         15
highstandbythreshold 50
standbydelaylow      10800
 
Hello
I am working on an HP ProBook 450 G3
Processor I7-6500U CPU
HD Graphics 520 (Skylake GT2)
Sound CX20724

Using Mojave 10.14.4 I have a 20 s normal boot time.
But I observed more and more often, a slow boot of more than 2 mn
Comparing normal and slow boot sytemlogs, I observed that slow system log has always at least one line like :

Class xxxxxx is implemented in both /System/Library/PrivateFrameworks/SpotlightServerKit.framework/Versions/A/SpotlightServerKit (0x7fffaf75ed40) and /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Support/mds (0x10fcfd100). One of the two will be used. Which one is undefined.8
As I can’t get rid of that, yesterday I updated 10.14.4 to 10.14.6 from recovery partition boot.
All boots were normal, then slow boot comes back tonight.

I would like some help to understand where does slow boot come from
all requested files are attached
and I attached slow boot systemlog
 

Attachments

  • Requested files.zip
    23.5 MB · Views: 63
  • System log slow boot.zip
    3.4 KB · Views: 76
Last edited:
Why not just disable SIP via config.plist?

SIP.png
 
You are right
I checked my config.plist and it was already set to 0x67 before previous csrutil disable
so...
slow boot must probably comes back
wait and see .....
I update :
slow boot is back again !

So help needed .....
 
Last edited:
My laptop : ProBook 440 G7, Core i7-10510U(1.80 GHz,8MB),16GB RAM,512GB SSD,Intel UHD Graphics 620 ,14"FHD.
I make usb install, but when first install it stuck logo apple.
Please help me !!!
 
Status
Not open for further replies.
Back
Top