[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[RehabMan]

Ok, I have updated my profile and uploaded all the files for the unsupported HP.
I have installed Mac OS 10.14 Mojave. Can you fix battery and audio now?

Wrong audio codec dump.
The one you gathered is for digital. Need onboard audio dump.

BTW, make sure your ACPI dump represents up-to-date BIOS.

 

[logo123]

Wrong audio codec dump.
The one you gathered is for digital. Need onboard audio dump.

BTW, make sure your ACPI dump represents up-to-date BIOS.

I updated the dump. To update Bios, I have to swap the SSD. I will dump again later.

 

[RehabMan]

I updated the dump. To update Bios, I have to swap the SSD. I will dump again later.

OK, I'll look at your files later, when you have updated ACPI dump.

Note that you will also need to go through the "USB customization" process.

 

[iHermno]

Note: Removed AppleALC.kext download attachment from post #1. Updated kext is now in probook.git/kexts. Installed automatically by install_downloads.sh (download via download.sh is disabled for now, until official build is fixed).

Tested and it's not working yet, i will wait update on the official build.
Also can you add to guide - 'install_acpi.sh install_4x40 -QUIET' without - it doesn't detect in the script.

 

[RehabMan]

Tested and it's not working yet, i will wait update on the official build.

It works here just fine (I have a 4540s and have tested it).

You must have made a mistake.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Also can you add to guide - 'install_acpi.sh install_4x40 -QUIET' without - it doesn't detect in the script.

-QUIET is not valid.
Read post #1.

 

[logo123]

OK, I'll look at your files later, when you have updated ACPI dump.

Note that you will also need to go through the "USB customization" process.

Updated acpi dump. I did not know that I can update bios without Windows.

 

[RehabMan]

Ok, I have updated my profile and uploaded all the files for the unsupported HP.
I have installed Mac OS 10.14 Mojave. Can you fix battery and audio now?

Added prelim support for 8x0 G3 Broadwell.

USB configuration is from G2, which is probably not correct. After you get it going, readpost #1, "USB customization" and reply with the required data.

 

[iHermno]

It works here just fine (I have a 4540s and have tested it).

You must have made a mistake.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Attached the reporting files.

-QUIET is not valid.
Read post #1.

nvm it's fixed now, it gave error on the old thread.

 

[RehabMan]

Attached the reporting files.



nvm it's fixed now, it gave error on the old thread.

Your problem is obvious from kextcache output... your AppleHDA kexts are damaged and/or wrong file permissions:

Kext rejected due to improper filesystem permissions: <OSKext 0x7fe71134d000 [0x7fffa24348e0]> { URL = "AppleHDA.kext/ -- file:///System/Library/Extensions/", ID = "com.apple.driver.AppleHDA" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fe711332b20 [0x7fffa24348e0]> { URL = "IOHDAFamily.kext/ -- file:///System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/", ID = "com.apple.iokit.IOHDAFamily" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fe711333820 [0x7fffa24348e0]> { URL = "AppleMikeyDriver.kext/ -- file:///System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/", ID = "com.apple.driver.AppleMikeyDriver" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fe711336a90 [0x7fffa24348e0]> { URL = "AppleHDAHardwareConfigDriver.kext/ -- file:///System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/", ID = "com.apple.driver.AppleHDAHardwareConfigDriver" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fe70ef5d000 [0x7fffa24348e0]> { URL = "DspFuncLib.kext/ -- file:///System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/", ID = "com.apple.driver.DspFuncLib" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fe70efac440 [0x7fffa24348e0]> { URL = "AppleHDAController.kext/ -- file:///System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/", ID = "com.apple.driver.AppleHDAController" }

Run the macOS installer to restore your system kexts and permissions.

Also:
- your config.plist is wrong/old. Read post #1, "Final config.plist"
- your ACPI files are not up-to-date. Read post #1 regarding install_acpi.sh

 

[y010204025]

Hey, rehabman, when I use ./install_acpi.sh xxxx, I found that the terminal prompts the path error, I can't find the directory.

ningnandeMacBook-Pro% ./install_acpi.sh install_8x0g3_skylake
rm: /Volumes/UNTITLED: is a directory
rm: /Volumes/UNTITLED: is a directory

When I change the name of the EFI partition to EFI, the script can copy the file normally, whether it is in ./mount_efi .sh Add a command to rename the name of the partition where EFI is located, and rename the partition where EFI is located to EFI.

ningnandeMacBook-Pro% ./install_acpi.sh install_8x0g3_skylake
SSDT-8x0G3s.aml       SSDT-FANREAD.aml   SSDT-IGPU.aml