[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[WhenMusicAttacks]

I made a custom SSDT for USBInjectAll for HP Elitebook 840 G5, it was the only thing missing after following the guide, using the 8x0 g4 config.

Did you get the trackpad working ?

 

[prabs99]

Has anyone gotten past the HDCP warning on Itunes on a Elitebook 840 G1?

 

[cekeglez]

Did you get the trackpad working ?

Yes with voodoops2controller by rehabman, the click doesn’t work but the new one by accidenthara, doesn’t work at all, the movement is too fast in the lowest position on the speed slider. Although i have had two kernel panics related with voodoops2 and usbs, one before having the custom SSDT for usbs and one yesterday, I deactivated all trackpads functions, wich dont work and i will see if it happens again.

 

[northernlights]

Trackpad on an 850G5 is working with a build of VoodooI2C from here. https://www.tonymacx86.com/threads/voodooi2c-help-and-support.243378/page-125#post-1997676

 

[phuchung666]

Thanks for your guide, Mojave works on my HP 8570p but I have a problem
Sometimes the Graphics or/and Intel Ethernet does not work, it happens occasionally, then I restart and it works, sometimes I need to restart several times to make both them work.

My specs: i7 3520M, HD4000, I also attach my config.plist.

Many thanks!

 

[dummybrain]

Hi all, could anyone pls help me out? My hp probook 430 G2 (HD 4400) gives me the creeps. Rehabman's work is awesome - I managed to pull it off for 10.13.0-6. But Mojave drives me nuts. I cannot get to the installer screen. Can anyone please give me a helping hand? TIA

 

[prabs99]

Hi all, could anyone pls help me out? My hp probook 430 G2 (HD 4400) gives me the creeps. Rehabman's work is awesome - I managed to pull it off for 10.13.0-6. But Mojave drives me nuts. I cannot get to the installer screen. Can anyone please give me a helping hand? TIA

Can you give us a screenshot of the error using verbose boot to install.

 

[dummybrain]

Can you give us a screenshot of the error using verbose boot to install.

Hey prabs99, thank you so much for your reply. I realised that my description is slightly wrong. I'm actually stuck in the installer or to be more precise at the last step(s) of the installation. You know that screen that usually (after a couple of seconds) shows the menu where you choose your country, language settings for the keyboard etc.? This is what doesn't show up. It's the light grey screen and the mouse cursor. The only thing I can do is sit and wait or do a single left click and the cursor disappears. End of line. Nothing else happens. I did manage to get to a full installation though because I was lucky to have the first Mojave version. But using the exact same steps for 10.14.6 simply won't work. But if need be, I will try again to produce the error screen in question. I'm afraid that it won't be a great help because there is no choosing verbose at that stage.

 

[prabs99]

Hey prabs99, thank you so much for your reply. I realised that my description is slightly wrong. I'm actually stuck in the installer or to be more precise at the last step(s) of the installation. You know that screen that usually (after a couple of seconds) shows the menu where you choose your country, language settings for the keyboard etc.? This is what doesn't show up. It's the light grey screen and the mouse cursor. The only thing I can do is sit and wait or do a single left click and the cursor disappears. End of line. Nothing else happens. I did manage to get to a full installation though because I was lucky to have the first Mojave version. But using the exact same steps for 10.14.6 simply won't work. But if need be, I will try again to produce the error screen in question. I'm afraid that it won't be a great help because there is no choosing verbose at that stage.

I am guessing you followed the guide. Can you post your EFI folder?

 

[dummybrain]

I am guessing you followed the guide. Can you post your EFI folder?

To the letter (at least I hope so) with one exception for a kext which was not included in Rehabman's repository, so I picked it from tonymac's download section. I used rehab man's clover and also tried out Clover_v2.5k_r5070. The result was the same. With ages of waiting for installer to (re-)start I always end up with the grey screen/mouse cursor waiting for the window to pop up where you choose the country/language. The attached EFI is from the rehabman-clover build (Clover_v2.4k_r4701.RM-4963.ca6cca7c).
Thank you so much for having a closer look!