- Joined
- Oct 27, 2013
- Messages
- 8
- Motherboard
- HP8300
- CPU
- i7 3.09Ghz
- Graphics
- Intel 4000
- Mac
- Mobile Phone
Hey Rehabman
i have this coming when i peform the ssdtPRGen.sh
gDataPath: /Users/probook/Library/ssdtPRGen/Data
System information: Mac OS X 10.13.6 (17G65)
Brandstring 'Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz'
Scope (\_PR_) {222 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookPro8,2' with board-id [Mac-94245A3940C91C80]
Sandy Bridge Core i7-2670QM processor [0x206A7] setup [0x0703]
With a maximum TDP of 45 Watt, as specified by Intel
Number logical CPU's: 8 (Core Frequency: 2200 MHz)
Number of Turbo States: 9 (2300-3100 MHz)
Number of P-States: 24 (800-3100 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0703 instead of 0x0603)
any help much appreciated.
Thank You very much.
i have this coming when i peform the ssdtPRGen.sh
gDataPath: /Users/probook/Library/ssdtPRGen/Data
System information: Mac OS X 10.13.6 (17G65)
Brandstring 'Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz'
Scope (\_PR_) {222 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookPro8,2' with board-id [Mac-94245A3940C91C80]
Sandy Bridge Core i7-2670QM processor [0x206A7] setup [0x0703]
With a maximum TDP of 45 Watt, as specified by Intel
Number logical CPU's: 8 (Core Frequency: 2200 MHz)
Number of Turbo States: 9 (2300-3100 MHz)
Number of P-States: 24 (800-3100 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0703 instead of 0x0603)
- the bit above, warning, is this a big issue for my laptop...i have upgraded the cpu and it all seems to work ok its just i get this warning and wanted your opinion.
- every now and then get strange lines on my screen and also laptop freezes and need to restart it to work again.
- can you check my data to see if i have done it all correctly.
any help much appreciated.
Thank You very much.