Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
RehabMan said:
Experiment with different BrcmPatchRAM delays (read BrcmPatchRAM README.md).
Click to expand...


I've tried various combinations of delays but the closest thing to show some progress was:

kext-dev-mode=1 dart=0 -disablegfxfirmware bpr_probedelay=100 bpr_initialdelay=400 bpr_preresetdelay=200 bpr_postresetdelay=1200

With that delays it has actually woken up from sleep for three times, if it was immediately woken up. If computer stays in sleep for longer time e.g. 1 min issue persists and Bluetooth is not available.

Any advice would be appreciated.
 
piromanneo said:
I've tried various combinations of delays but the closest thing to show some progress was:

kext-dev-mode=1 dart=0 -disablegfxfirmware bpr_probedelay=100 bpr_initialdelay=400 bpr_preresetdelay=200 bpr_postresetdelay=1200

With that delays it has actually woken up from sleep for three times, if it was immediately woken up. If computer stays in sleep for longer time e.g. 1 min issue persists and Bluetooth is not available.

Any advice would be appreciated.
Click to expand...

You will need to experiment with different delays until you find a set that works.
It will be a time consuming process.
 
Hello again
My laptop 430 g4
I got WiFi card dw 1820a
When I put card boot stuck
When without card boot normal
 

Attachments

  • ae_1526500531567.jpg
    ae_1526500531567.jpg
    377.3 KB · Views: 79
  • IMG_20180516_233202.jpg
    7.8 MB · Views: 89
  • IMG_20180516_233152.jpg
    7.5 MB · Views: 89
  • IMG_20180516_233202.jpg
    7.8 MB · Views: 68
Hi I use a 9470m with i7 and 1600x900 it runs everything, but did it without this guide. Does the 4352HMB have to be HP Branded or does AzureWave Broadcom BCM94352HMB / BCM94352 work?
 
SirusX said:
Hi I use a 9470m with i7 and 1600x900 it runs everything, but did it without this guide. Does the 4352HMB have to be HP Branded or does AzureWave Broadcom BCM94352HMB / BCM94352 work?
Click to expand...

WiFi recommendations are in post #1.

Hint: Your laptop has no WiFI whitelist.
 
Greetings. Followed your guide to the best of my abilities and almost everything works. One annoying issue is that whenever I boot or restart the system it is always at maximum screen brightness and then I have to dim it. Any suggestions?
 
egmus said:
Greetings. Followed your guide to the best of my abilities and almost everything works. One annoying issue is that whenever I boot or restart the system it is always at maximum screen brightness and then I have to dim it. Any suggestions?
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Is it possible to install multiboot with OSX + Windows 7 32 + Windows 7 64 on a Probook 450 G4 ?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top