Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

RehabMan

Moderator
Joined
May 3, 2012
Messages
186,497
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
I followed that. I have tried to trim it down to under 5mb.
Maybe I can send it piecemeal rather than one zip, which has the EFI folder minus themes and the Apple and Boot folders

EFI was never requested. "Problem Reporting" request asks for only EFI/Clover, not entire EFI folder.

I have also included an ioreg file and Terminal Saved Output files inside the folder that will unzip.

You forgot to press enter after 'system_profiler SPSerialATADataType|grep TRIM'. but...
Your ioreg shows you installed on APFS. And you have TRIM enabled.
Current config.plist files checked into github have TRIM disabled.
You need to disable TRIM or install on HFS+ instead of APFS.
Read here for more info:
https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/
 
Joined
Jan 6, 2012
Messages
34
Motherboard
HP EliteBook 840 g1 (CLOVER UEFI)
CPU
Intel i5 4200u 2.6ghz
Graphics
HD4400 1920x1080
Mobile Phone
  1. iOS
0x04260000
Your Find pattern is wrong.
Actual data for 0105 in 0x04260000 is:
01 05 09 00 04 00 00 00 04 00 00 00

Ok ive corrected the ports now they are properly listed in IOreg, but none of them works(no displays are detected at VGA and DP connectors on laptop and dock): neither are detected in IOreg, when display plugged in nothing happens.
 

Attachments

  • files.zip
    2.6 MB · Views: 55

RehabMan

Moderator
Joined
May 3, 2012
Messages
186,497
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
Ok ive corrected the ports now they are properly listed in IOreg, but none of them works(no displays are detected at VGA and DP connectors on laptop and dock): neither are detected in IOreg, when display plugged in nothing happens.

VGA is not supported, so I have no plans to help you with that one.
For laptop DP port, attach ioreg and corresponding config.plist that shows it working.
 
Joined
Dec 2, 2011
Messages
225
Motherboard
Gigabyte GA-Z170X-UD3
CPU
i7-6700K
Graphics
GT 640
Mac
  1. MacBook
  2. MacBook Air
  3. MacBook Pro
Classic Mac
  1. PowerBook
Mobile Phone
  1. iOS
EFI was never requested. "Problem Reporting" request asks for only EFI/Clover, not entire EFI folder.



You forgot to press enter after 'system_profiler SPSerialATADataType|grep TRIM'. but...
Your ioreg shows you installed on APFS. And you have TRIM enabled.
Current config.plist files checked into github have TRIM disabled.
You need to disable TRIM or install on HFS+ instead of APFS.
Read here for more info:
https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/

So, I need run system_profiler SPSerialATADataType|grep TRIM in terminal?

That's done. But same problems. Won't sleep in HSierra and the battery icon has to be invoked, even with the latest kext.
EFI was never requested. "Problem Reporting" request asks for only EFI/Clover, not entire EFI folder.



You forgot to press enter after 'system_profiler SPSerialATADataType|grep TRIM'. but...
Your ioreg shows you installed on APFS. And you have TRIM enabled.
Current config.plist files checked into github have TRIM disabled.
You need to disable TRIM or install on HFS+ instead of APFS.
Read here for more info:
https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/

It must be something else. I have disabled TRIM. (And do we know which SSDs don't play well with 10.13?)

The suggested battery kext isn't working, at least not in L/E.

And Windows 10 won't wake from sleep. The same symptoms as 10.13: The power button lights up, the WiFi light is amber. The Windows is on a caddy in the optical bay. So, it's separate from the APFS-formatted drive. I don't think it's a mechanical failure outside of this kind of discussion. But the only way to know is swap drives, turn off UEFI boot, and see what happens with only the Windows SSD being invoked.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
186,497
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
So, I need run system_profiler SPSerialATADataType|grep TRIM in terminal?

Not really. Even though you forgot to press enter, I can tell you have TRIM enabled because the patch is clearly enabled in config.plist (even though current files in github have it disabled).

That's done. But same problems. Won't sleep in HSierra and the battery icon has to be invoked, even with the latest kext.
The suggested battery kext isn't working, at least not in L/E.

No idea what you mean by "that" in "that's done".

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

And Windows 10 won't wake from sleep. The same symptoms as 10.13: The power button lights up, the WiFi light is amber.

Likely a hardware problem.
 
Joined
Dec 2, 2011
Messages
225
Motherboard
Gigabyte GA-Z170X-UD3
CPU
i7-6700K
Graphics
GT 640
Mac
  1. MacBook
  2. MacBook Air
  3. MacBook Pro
Classic Mac
  1. PowerBook
Mobile Phone
  1. iOS
Not really. Even though you forgot to press enter, I can tell you have TRIM enabled because the patch is clearly enabled in config.plist (even though current files in github have it disabled).



No idea what you mean by "that" in "that's done".

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Not really. Even though you forgot to press enter, I can tell you have TRIM enabled because the patch is clearly enabled in config.plist (even though current files in github have it disabled).



No idea what you mean by "that" in "that's done".

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/



Likely a hardware problem.


Likely a hardware problem.
Not really. Even though you forgot to press enter, I can tell you have TRIM enabled because the patch is clearly enabled in config.plist (even though current files in github have it disabled).



No idea what you mean by "that" in "that's done".

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/



Likely a hardware problem.


That's done = TRIM is disabled. I have an HDD with 10.12.6, I will boot from that one and see if the sleep is not waking. I booted from it via Clover on the SSD (with 10.13), but the HDD wouldn't wake either.

I should try to boot off the Windows SSD without going through Clover, too. That might rule out hardware problem. But it seems odd to have one like this after owning this sturdy laptop since early 2012.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
186,497
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
That's done = TRIM is disabled. I have an HDD with 10.12.6, I will boot from that one and see if the sleep is not waking. I booted from it via Clover on the SSD (with 10.13), but the HDD wouldn't wake either.

I should try to boot off the Windows SSD without going through Clover, too. That might rule out hardware problem. But it seems odd to have one like this after owning this sturdy laptop since early 2012.

Any change requires new problem reporting files.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
Joined
Dec 2, 2011
Messages
225
Motherboard
Gigabyte GA-Z170X-UD3
CPU
i7-6700K
Graphics
GT 640
Mac
  1. MacBook
  2. MacBook Air
  3. MacBook Pro
Classic Mac
  1. PowerBook
Mobile Phone
  1. iOS
Any change requires new problem reporting files.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Okay. Tomorrow. I need to rule out hardware, which is another matter.

UPDATE: I reinstalled the new BIOS and this fixed the sleep problem for both High Sierra and Windows 10. :headbang:So, it was that. But the reason I updated the BIOS was to solve this problem.:banghead:
 
Last edited:
Joined
Mar 24, 2017
Messages
20
Motherboard
Alienware 51m R2 Laptop
CPU
i7-10700k
Graphics
Radeon RX 5700m
Ok ive corrected the ports now they are properly listed in IOreg, but none of them works(no displays are detected at VGA and DP connectors on laptop and dock): neither are detected in IOreg, when display plugged in nothing happens.
The DP connectors on the Ultraslim 2013 dock are connected through a Synaptics DP MST hub that is built into the dock. The hub may be interfering with detecting and using the displays because AFAIK OSX doesn't support MST hubs on Intel graphics.
 
Joined
Dec 1, 2016
Messages
12
Motherboard
HP Elitebook 840 G1-Clover
CPU
i5-4200U
Graphics
HD 4400,1920x1080
Mobile Phone
  1. iOS
HP 840 G1, High Sierra. When Undock, everything works great. When Dock, Got Panic when try to reboot.
 
Top