- Joined
- Dec 23, 2014
- Messages
- 28
- Motherboard
- HP Elitebook Folio 9470m
- CPU
- Core i7-3687U @ 2.10 Ghz
- Graphics
- HD4000, 1366x768
- Mac
- Classic Mac
- Mobile Phone
Read post #1, "Problem Reporting".
Read again. Updated with IOReg.
Read post #1, "Problem Reporting".
Read again. Updated with IOReg.
Missing:
- kextcache output
- EFI/Clover
Read post #1, "Problem Reporting". Carefully.
Sorry bout that. Added EFI/CLOVER without themes and kextcache output.
Merry Christmas!
I will understand if no helps immediately.
I have installed Sierra on HP Elitebook Folio 9470m today. My installer works great even if it's created using a Virtualbox.
I tried two configurations: 4x40s and 9x70. Oddly, 4x40 worked better for me.
There's nearly no difference, it seems. Everything works except for battery status and audio.
For 9x70, I had to use the boot flag cpus=1 for to get past the kernel panic error.
What's not working:
* Battery status says "No Battery Available."
* Audio does not work despite "rebuilding cache" several times and rebooting.
Attached the requested files and output. Read post #2 several times. I don't know what I should do to fix this.
IMHO, I don't want a clean install because of audio not working. The computer boots just fine without kernel panic.
Thank you for the help!
If you use Git Tip or Gratipay or similar, I can make donations to specific projects. Certain many would want to do that too. Just an idea.
# ProBook_4x0s_G3_Skylake is CX20724, Skylake, HDMI
I believe Zenbook is Asus and not HP and therefore is not supported by this guide.Hi, sir. I got a new Zenbook U306UA(skylake). Below are the files you need.
Oh, Sorry. I mistake Zbook to Zenbook.I believe Zenbook is Asus and not HP and therefore is not supported by this guide.