Contribute
Register

[Guide] HP Envy Haswell series J/K/Q/N using Clover UEFI

Status
Not open for further replies.

Attachments

  • 44BBB32C-8EDB-4C39-A764-FD47EEFB4EBA.png
    44BBB32C-8EDB-4C39-A764-FD47EEFB4EBA.png
    367.4 KB · Views: 83
Here is the debug zip file.

Thanks

No ioreg in that debug zip. Please check files for completeness before uploading.
 

Attachments

  • debug_32508.zip
    5.4 MB · Views: 75
Here is another using the terminal command "gen_debug -sysprofile txt" to generate

Still no ioreg present in that debug zip.
Please check your files carefully before upload.
 
Are these the files you want?
 

Attachments

  • Benny MacBook Pro.zip
    594.7 KB · Views: 74
  • RehabMan.zip
    53 KB · Views: 77
Your config.plist is wrong.
Read post #1, "Final config.plist".
Thanks RehabMan, after I reinstall the whole Hackintosh MacOS on my HP Envy 15-q010tx, and carefully use the "q" options, also copy "q" config.plist, the audio device appears in the system prep, I can hear sound output from headphone jack, but the internal speaker still no sound out.
What have I missed?
 

Attachments

  • Benny MacBook Pro.zip
    624.3 KB · Views: 71
  • RehabMan.zip
    53 KB · Views: 76
Thanks RehabMan, after I reinstall the whole Hackintosh MacOS on my HP Envy 15-q010tx, and carefully use the "q" options, also copy "q" config.plist, the audio device appears in the system prep, I can hear sound output from headphone jack, but the internal speaker still no sound out.
What have I missed?
"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Status
Not open for further replies.
Back
Top