Contribute
Register

[Guide] HP Envy Haswell series J/K/Q/N using Clover UEFI (10.11)

Status
Not open for further replies.
If Mr Rehabman agree I could spend my experience
Can you explain better, MSATA and SATA drives: brand and capacity, So Samsung 250gb, crucial,etc...
You need to boot OS X and Windows on the same machine?
Sure.
- I installed both windows 10 and macOS on SSD mSATA (Intel 530 240Gb).
- My EFI partition is place on HDD SATA. I tried to place EFI on SSD, but my machine can't find OS boot manager, and it's said that I must install boot option on hard drive. So, I must place my EFI partition on HDD SATA, which is disk 0 on system. I think it's because of old version of BIOS, so that EFI must be on HDD for boot.
- Windows boot automatic when I press power button, if I want to boot into clover, I must use f9 to select it. I'm trying to make system boot into clover automatic whenever I restart or press power button :)
Do you have any advice for me? Thank you :)
 
Sure.
- I installed both windows 10 and macOS on SSD mSATA (Intel 530 240Gb).
- My EFI partition is place on HDD SATA. I tried to place EFI on SSD, but my machine can't find OS boot manager, and it's said that I must install boot option on hard drive. So, I must place my EFI partition on HDD SATA, which is disk 0 on system. I think it's because of old version of BIOS, so that EFI must be on HDD for boot.
- Windows boot automatic when I press power button, if I want to boot into clover, I must use f9 to select it. I'm trying to make system boot into clover automatic whenever I restart or press power button :)
Do you have any advice for me? Thank you :)

On which device is EFI\Microsoft?
 
On which device is EFI\Microsoft?
HDD SATA, I put all clover and EFI\Microsoft into 1 EFI partition.
I also have 1 EFI partition on SSD, but just use to backup incase my HDD got problem.
I found a BIOS version f69 rev a on HP support sites. Should I update my BIOS? :D
update: installed lasted bios, I found it no change anything.
I try to set boot order again by ubuntu, clover keep loading automatic if I just boot into MacOS. If I boot into windows or ubuntu. System will reset boot order and windows boot manager always 1st.
Tried to set bootmgr path with bcdedit on windows, but no luck.
How about option "add clover boot option to all entries" of Clover? I still don't know what it do :D
 
Last edited:
HDD SATA, I put all clover and EFI\Microsoft into 1 EFI partition.
I also have 1 EFI partition on SSD, but just use to backup incase my HDD got problem.
I found a BIOS version f69 rev a on HP support sites. Should I update my BIOS? :D
update: installed lasted bios, I found it no change anything.
I try to set boot order again by ubuntu, clover keep loading automatic if I just boot into MacOS. If I boot into windows or ubuntu. System will reset boot order and windows boot manager always 1st.
Tried to set bootmgr path with bcdedit on windows, but no luck.
How about option "add clover boot option to all entries" of Clover? I still don't know what it do :D

Try with EFI\Microsoft on the mSATA (where Windows is installed).
Read what @aserigfx wrote.
 
Try with EFI\Microsoft on the mSATA (where Windows is installed).
Read what @aserigfx wrote.
@RehabMan @aserigfx Thank you for your advices. I finally did it. What I did:
- Deleted \EFI\Microsoft on EFI partition on SATA HDD.
- Deleted all data on EFI partition on SSD, just keep \EFI\Microsoft.
- Reboot, boot into ubuntu and set efibootmgr order for Clover.
Now everything work exactly what I expect. I'm so happy about this :D
One again, thank you very much for helped me. Love you all :D
 
Status
Not open for further replies.
Back
Top