Sniki
Moderator
- Joined
- Jan 5, 2016
- Messages
- 2,313
- Motherboard
- HP Elite 8300 SFF
- CPU
- i7-3770
- Graphics
- Intel HD 3000 | GTX 1650 LP
- Mac
- Mobile Phone
Yes it is possible, if you are using my files from this guide, all you have to do is add this kernel flag: -uia_ignore_rmcfI Cant thank you enough for the guide its just so perfect, I've been using the HP 8300 for a year but have never found a build to be working this great, all thanks to your time and efforts put into this.
My hp 8300 has memory card slots and a additional USB slot next to the CD/DVD Disk Drive, would it be possible to get it working too? All these are slots are connected via a SATA cable. Any suggestions would be appreciated.
and reboot, open ioreg and while keeping ioreg open plug a usb 2.0 device (mouse or keyboard) and unplug it and then plug a usb 3.0 device into that port (like an external 3.0 hdd or usb 3.0 flash drive, etc).
unplug the usb 3 device as well and save the ioreg and upload it here.
i will update the SSDT-HP.aml to include that additional port for usb.