Contribute
Register

[Guide] HP Elite 8300 & 6300 Pro (all form factors) using Clover UEFI hotpatch

Status
Not open for further replies.
There might be a Bios setting causing the issues for you, which version do you have ?

3.04

Have you tried booting without caches ? and then rebuilding caches , reboot and see if it works.


Done, but still without sound.


Also: are you using the Rehabman build of Clover Bootloader ?

Yes. I'm using the version: Clover_v2.4k_r4701.RM-4963.ca6cca7c
 

Attachments

  • hpElite 8300.ioreg
    8.7 MB · Views: 82
@onastvar changes pushed to the repository.

Download the new SSDT-HP.aml from my repository, remove the kernel flag, reboot and enjoy.

@Sniki thank you so much, solution worked. I appreciate your assistance. Great job!
 
hi I installed Mojave on my hp 8300 off with i5 processor evga card gt 710 I can't get my card working properly it says Nvidia chip model 8 , I thought the gt 710 was native with Mojave and yes it is gdr3 2gb any help pls ? thx
 
hi I installed Mojave on my hp 8300 off with i5 processor evga card gt 710 I can't get my card working properly it says Nvidia chip model 8 , I thought the gt 710 was native with Mojave and yes it is gdr3 2gb any help pls ? thx
As for everyone with a problem, post problem reporting files to get help. Thanks.
 
I’m sorry to be a pain how do I do that I’m new on the Hackintosh, and I was following the setup guide from start , I bought a EVGA gt 710 and followed Unibeast guide
 
My computer is a HP 8300 sff core I5 3470 3.2 ghz 8gb ram 120 ssd , installations goes ok , I can’t get audio to work and my graphics doesn’t work I uncheck inject intel from clover and don’t use multi beast for my graphics driver
 
My computer is a HP 8300 sff core I5 3470 3.2 ghz 8gb ram 120 ssd , installations goes ok , I can’t get audio to work and my graphics doesn’t work I uncheck inject intel from clover and don’t use multi beast for my graphics driver
From Post #1
Is there a script that will collect all Problem Reporting data automatically?

Yes! (almost)

User @black.dragon74 has created a script (gen_debug.sh) that automates most of the "Problem Reporting" tasks (as described in the previous question).

The part it cannot do is pressing F2 and F4 for you at the main Clover screen.
And of course, it only works for the case you can boot into your system. If you have a problem booting, you must obtain and collect the verbose boot photo manually (and EFI/Clover).

Full details are here:
https://www.tonymacx86.com/threads/tool-generate-proper-problem-reporting-files.235953/
 
That’s wa I keep geting now I managed to install it it says is a Mac mini now but keeps restarting loads and I can’t boot from sdd even though I installed the Bootloader there :(
 

Attachments

  • 28AC6525-82CB-4D77-9B13-39E3C839394B.jpeg
    28AC6525-82CB-4D77-9B13-39E3C839394B.jpeg
    4.7 MB · Views: 67
  • 77F370C2-90FC-449C-B18C-124A2D4C8B53.jpeg
    77F370C2-90FC-449C-B18C-124A2D4C8B53.jpeg
    4.1 MB · Views: 69
All done mate wa it was I didn’t put the Kext of the efi folder , never used the EFI Mounter on the ssd
 
Status
Not open for further replies.
Back
Top