trs96
Moderator
- Joined
- Jul 30, 2012
- Messages
- 25,535
- Motherboard
- Gigabyte B460M Aorus Pro
- CPU
- i5-10500
- Graphics
- RX 570
- Mac
- Mobile Phone
Realtek ALC221 and AppleALC 1.3.2
If you are using the onboard analog audio on your HP this is just a notice to avoid updating to the newest AppleALC and Lilu kexts. After testing the newest AppleALC on my HP 6300 Pro today, the system (on 10.13.6) would not boot at all. So stay with AppleALC 1.2.7 and Lilu 1.2.5.
EDIT: After disabling SIP completely the newest AppleALC (1.3.2) works
You can easily disable SIP by using Clover Configurator. Change the CsrActiveConfig entry to 0x67 instead of 0x3 which is the default. If you want to keep SIP enabled then use the AppleALC 1.2.8 kext, that will still work.
Last edited: