- Joined
- Sep 17, 2017
- Messages
- 39
- Motherboard
- HP 6300 PRO SFF
- CPU
- i7-3770
- Graphics
- HD 4000
- Mac
- Mobile Phone
If you are using the built in speaker that is normal. If it's happening via HDMI audio or the front headphone or rear audio out jack then it's not normal. You may have to tweak some settings in the VoodooHDA control panel to get more volume.@trs96
Please I would like to know why the sound is very low in macOS but when in Windows its very LOUD.... Is there a fix to this?? I am thinking of ditching Windows and switching to macOS for good and if there was a fix to this( low Sound ) I would really appreciate it.
As an aside, is anyone else having success with their PCI slot under macOS?
The GT710 drivers are already within macOS, you don't need to install the web drivers when using a GT710. Anyway, two things you'll need to do. Put your hardware specs, CPU, graphics and mobo into your https://www.tonymacx86.com/account/personal-details section. Then start a new thread, just about your HS install, in High Sierra Desktop Support. High Sierra is off topic for this thread. Use that desktop support forum to get help. Make sure to detail exactly what you did during HS install and post install.My thinking was that the graphic drivers weren't installed when I first installed (since the graphics card wasn't installed). Same results; boot hangs with a spinner.
If I remove the graphics card and use a DisplayPort to HDMI cable, it boots with no problems.
Any ideas?
The GT710 drivers are already within macOS, you don't need to install the web drivers when using a GT710. Anyway, two things you'll need to do. Put your hardware specs, CPU, graphics and mobo into your https://www.tonymacx86.com/account/personal-details section. Then start a new thread, just about your HS install, in High Sierra Desktop Support. High Sierra is off topic for this thread. Use that desktop support forum to get help. Make sure to detail exactly what you did during HS install and post install.
Boot with your DP to HDMI connection. Mount your boot drive's EFI partition. Save a copy of the Clover Config.plist as a zip file.
Attach that to your new HS help/support thread. Also, boot with your GT710 installed and take a screen shot/pic of the last section of the kernel panic (where it stops) as well. Choose verbose booting by pressing the space bar at the Clover menu. Thanks in advance.