[Guide] How to patch DSDT for working battery status

[nysander]

moving ACPIBatteryManager to /L/E changed nothing. Also kernel panic

 

[Feartech]

moving ACPIBatteryManager to /L/E changed nothing. Also kernel panic

best to read the laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

post 2 explains about installing kexts

 

[RehabMan]

Hi,

DSDT patched with your
ASUS N55SL/VivoBook patch and MaciASL : still 0% Battery

I've used the gen_debug.sh and the debug files are attached.

it's ok for you ?

Regards,

Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[dooglex]

Thanks Rehabman, I followed the guide and got it working on my Lenovo X210.
The patch I used and my unpatched DSDT is attached here for consideration.

Thanks again!

 

[RehabMan]

Thanks Rehabman, I followed the guide and got it working on my Lenovo X210.
The patch I used and my unpatched DSDT is attached here for consideration.

Thanks again!

Looks good. Added to the github project.
Thanks...

 

[kali2000]

Hi again @RehabMan ...!!!
I've noticed that the percentage read from my battery in my laptop is not right...
Can you help me to fix it...?

 

[BaJIeHTuHbI4]

Hello! I have problem with battery discharge.
Battery always 100% when discharging and 99% when charging.
Fully charged battery don't detected correctly - always 99%.

My specs:
Acer V3-571G not original battery.
Windows and Linux detect battery discharge without problems.

 

[RehabMan]

Hi again @RehabMan ...!!!
I've noticed that the percentage read from my battery in my laptop is not right...
Can you help me to fix it...?

Your ACPI is patched incorrectly.
And even your SystemMemory addresses do not match.
See guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

 

[RehabMan]

Hello! I have problem with battery discharge.
Battery always 100% when discharging and 99% when charging.
Fully charged battery don't detected correctly - always 99%.

My specs:
Acer V3-571G not original battery.
Windows and Linux detect battery discharge without problems.

ACPI is not patched correctly (wrong files in ACPI/patched).
Refer to the guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

 

[kali2000]

Your ACPI is patched incorrectly.
And even your SystemMemory addresses do not match.
See guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

@RehabMan I do not understand, I get zero errors when I compile.
All work fine... only this small issue with battery reading without AC charger.
The battery reading error only occurs if I boot without AC charger.
Can you show me where the errors are so I can try to fix them?
And why with AC charger work fine and without AC charger no?
Thanks in advance...