- Joined
- Aug 4, 2013
- Messages
- 76
- Motherboard
- ASUS G531GT
- CPU
- i5-9300H
- Graphics
- UHD 630+GTX 1650
First of all I am using CLEVO P65xRS series laptop and my layout-id is 65 if yours is different try to find your own layout id https://github.com/acidanthera/AppleALC/wiki/Supported-codecs
I open that guide because I find that fix accidentally and there are no other thread on anywhere
If you have alc898 driver and you cant use microphone or etc you need to try that
Also before you do that remove all sound related kext you installed before
Instructions:
1-) Download AppleALC kext https://github.com/acidanthera/AppleALC/releases from here
2-) Download multibeast https://www.tonymacx86.com/resources/categories/tonymacx86-downloads.3/ from here
3-) Put AppleALC kext on Clover kexts others folder then restart computer open sound settings if you can see your sound devices on here ( It doesnt metter on that point you got working audio) YOU HAVE TO skip step 4 if you are not try step 4
4-) Open System/Library/Extensions copy AppleHDA (dont delete it) put it on clover/kext/others folder reboot if still it wont recognize it move apple hda from System/Library/Extensions reboot and reinstall it with any kext utility.
5-) After that open multibeast select your audio codec its under drivers section (mine was alc898 so I selected mine if yours different then select yours). Then install
6-) Open Library Extensions (not system)and Remove RealtekALC.kext
Then Restart
7-) Use clover confugirator an edit your config.plist on your efi folder. open devices section type your layout id on audio part and select ResetHDA (try layout ids for your card https://github.com/acidanthera/AppleALC/wiki/Supported-codecs) and save then restart. Try it again until you find your proper layout id.
I hope it works good luck.
I open that guide because I find that fix accidentally and there are no other thread on anywhere
If you have alc898 driver and you cant use microphone or etc you need to try that
Also before you do that remove all sound related kext you installed before
Instructions:
1-) Download AppleALC kext https://github.com/acidanthera/AppleALC/releases from here
2-) Download multibeast https://www.tonymacx86.com/resources/categories/tonymacx86-downloads.3/ from here
3-) Put AppleALC kext on Clover kexts others folder then restart computer open sound settings if you can see your sound devices on here ( It doesnt metter on that point you got working audio) YOU HAVE TO skip step 4 if you are not try step 4
4-) Open System/Library/Extensions copy AppleHDA (dont delete it) put it on clover/kext/others folder reboot if still it wont recognize it move apple hda from System/Library/Extensions reboot and reinstall it with any kext utility.
5-) After that open multibeast select your audio codec its under drivers section (mine was alc898 so I selected mine if yours different then select yours). Then install
6-) Open Library Extensions (not system)and Remove RealtekALC.kext
Then Restart
7-) Use clover confugirator an edit your config.plist on your efi folder. open devices section type your layout id on audio part and select ResetHDA (try layout ids for your card https://github.com/acidanthera/AppleALC/wiki/Supported-codecs) and save then restart. Try it again until you find your proper layout id.
I hope it works good luck.