Just a quickie guide here:
PC Specs:
Mobo: based on the subject @F2 BIOS
CPU: i7 3930k @4ghz
RAM: 8x 8gb DDR3 1600
GPU: 3x GTX 680 @stock
SSD: Corsair Force GT 120gb @5.05 fw
LED: Samsung S27A950D @120hz
Requirements
- A working Mountain Lion compatible computer
- 16gb USB flashdrive
- Apple Store Purchased Mountain Lion (I got a 10.8.3)
Downloaded the ff latest apps:
- UniBeast Mountain Lion
- Multibeast Mountain Lion
- Kext Helper
- VoodooTSCSync.kext for Mountain Lion
and lastly... patience
Step 1: Preparing USB OSX Installer
Follow the instructions on creating a Unibeast on a working OSX setup
Link:
http://www.tonymacx86.com/61-unibeast-install-os-x-mountain-lion-any-supported-intel-based-pc.html
Step 2: OSX Installation proper
At the part of booting the OSX installer on the USB drive onto the Gigabyte motherboard use these parameters:
UseKextCache=Yes npci=0x3000 cpus=1 GraphicsEnabler=No -f
Step 3: Post OSX installation
Following back the instructions on the actual installation on the link on step 1, install OSX. After installation and upon reboot, boot back on the USB and choose the SSD where OSX was installed with the same parameters that was used on Step 2.
Once on the OSX desktop, install VoodooTSCSync.kext using Kext Helper
Run Multibeast. Choose EasyBeast Installation. Select also the ff:
Disk : IOAHCIBlockStorageInjector ; 10.8.3 TRIM Patch
Miscellaneous : ElliottForceLegacyRTC ; EvOreboot ; FakeSMC v5.1.61 ; NullCPUPowerManagement
Network : Intel - hnak's AppleIntelE1000
Bootloaders : Chimera v2.0.1 r2109
Boot Options : GraphicsEnabler=No ; PCI Configuration Fix ; Use KernelCache ; 1080p Display
System Definitions : Mac Pro 5,1
Once done, shutdown the computer, remove the USB flashdrive, power up the PC and boot on the SSD.
