[Guide] Dell XPS 9560 Big Sur OpenCore

[Zacharybinx34]

Well at least we narrowed it down to iGPU/monitor related

I would still disable CSM, but leave my EFI release untouched
Try this, it's my config but it includes edid override

IT WORKED!

I added the 4k config to your files, left everything untouched, booted with full igpu acceleration!

Thank you!

Now. Anything else you'd recommend I tweak up on it? Still think disable CSM?

 

[blazinsmokey]

IT WORKED!

I added the 4k config to your files, left everything untouched, booted with full igpu acceleration!

Thank you!

Now. Anything else you'd recommend I tweak up on it? Still think disable CSM?

ALRIGHT! I was nearing giving up helping you lol
Can you check if your display is running @ 60hz, other people have gotten it to work but only with 48hz
To check and change goto System pref/displays/ option + Scaled/check Show low resolution mode
Disable CSM is a good idea for most hacks, I do recommend that.

 

[Zacharybinx34]

ALRIGHT! I was nearing giving up helping you lol
Can you check if your display is running @ 60hz, other people have gotten it to work but only with 48hz
To check and change goto System pref/displays/ option + Scaled/check Show low resolution mode
Disable CSM is a good idea for most hacks, I do recommend that.

Yes, it's 48hz. Weird. No way around that to get it to 60?
Not seeing the CSM option - in the config.plist?

 

[theace9]

Getting stuck here all the time, if i do boot in then i have no IGPU accelerator. Dell 7567 with i7 7700hq intel hd 630 + nvid 1050 ti. i have dGPU disabled. I have tried everything and the gpu just won't get drivers installed

 

[blazinsmokey]

Yes, it's 48hz. Weird. No way around that to get it to 60?

Not that I have seen as I researched to make that config for you this is a pretty common thing and no-one has figured it. If you want to do testing, I do have some ideas. I'm pretty confident we can figure this out over time. Got some stuff to do maybe in a few hours I'll post some test configs.

Wanted to clear up one thing, so to install you had to remove the framebuffer completely? I wonder with the patched edid it would have went through. Maybe that was @saschabo had same issue, buddy check the config a pages back I posted that worked for Zacharybinx34.

 

[Feartech]

View attachment 500719

Getting stuck here all the time, if i do boot in then i have no IGPU accelerator. Dell 7567 with i7 7700hq intel hd 630 + nvid 1050 ti. i have dGPU disabled. I have tried everything and the gpu just won't get drivers installed

Graphics issue

make sure to do the Modding your UEFI section

 

[theace9]

Everything is modded

 

[Feartech]

Everything is modded

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com

 

[Zacharybinx34]

Not that I have seen as I researched to make that config for you this is a pretty common thing and no-one has figured it. If you want to do testing, I do have some ideas. I'm pretty confident we can figure this out over time. Got some stuff to do maybe in a few hours I'll post some test configs.

Wanted to clear up one thing, so to install you had to remove the framebuffer completely? I wonder with the patched edid it would have went through. Maybe that was @saschabo had same issue, buddy check the config a pages back I posted that worked for Zacharybinx34.

Yeah, I'm down for testing for sure!

As far as disabling CSM, where would you recommend I do that?

 

[blazinsmokey]

Yeah, I'm down for testing for sure!

As far as disabling CSM, where would you recommend I do that?

Modding UEFI section