Contribute
Register

[Guide] Dell XPS 13 9360 on MacOS Sierra 10.12.x - LTS (Long-Term Support) Guide

Status
Not open for further replies.
With my i7-8550U i can undervolt CPU and GPU by about 100mV, but this will almost definitely vary across different CPUs, even ones with the same specification. Experiment with 5mV steps, that way if something goes wrong you can reboot and adjust accordingly. Alternatively use VoltageShift; its values dont persist across reboots so if something goes wrong and the laptop crashe you're back to default voltage on next boot.
and how to I know what is the correct value for 5mV
UEFI IFR

TESTED & WORKING
=======
*Undervolt CPU
(0x653) -> 32 (-0.05V)
(0x655) -> 01

*Undervolt GPU
(0x85A) -> 32 (-0.05V)
(0x85C) -> 01

Upate: i find a guide and will try it. https://www.insanelymac.com/forum/topic/331775-guide-how-to-undervolt-your-haswell-and-above-cpu/

Do you have any idea to my camera issue written above?
 
Last edited:
Yes that’s not the right place for a camera.
Undervolting works fine with -100 -30.
I am happy with the geekbench results.
 
I just ordered this the XPS 13 9380. Does anyone have a link or info of a USB wifi dongle that would work. Also, are there any USB type C solutions? Besides the Wifi incompatibility are there any other issues when hackintoshing the XPS 13 9370/80?
 
AirDrop don't work, but it works before some time ago.
Right now , I can find and send files to my XPS 13 9360, but I can't find my iphone on my XPS 13 9360.
I'm running Mojave 10.14.4.

Here is the debug files.
 

Attachments

  • debug_20998.zip
    3.1 MB · Views: 153
I just ordered this the XPS 13 9380. Does anyone have a link or info of a USB wifi dongle that would work. Also, are there any USB type C solutions? Besides the Wifi incompatibility are there any other issues when hackintoshing the XPS 13 9370/80?
I use a TP Link AC600 Nano wireless Usb adaptor. Dual Band Wireless 2.4GHz and 5GHz . It is fast, low profile, good range, and is Mac Compatible. https://www.tp-link.com/au/home-networking/adapter/archer-t2u-nano/ .

I have not seen any usb Type C wifi. You will have to use Usb C to Usb A converter https://www.ebay.com.au/itm/Adapter-OTG-3-1-USB-C-Converter-Type-C-to-USB-A-3-0-Female-For-Mac-Nexus-5X-6P/132895146723?hash=item1ef12b02e3:m:mrw8dqwIvBt1DgQXgcr2XHw&LH_BIN=1
 
Last edited:
With the introduction of OpenCore, I've now committed an OpenCore configuration to the repository.
It would be good to get some feedback from users to see how well it works and what can be improved.
 
I've run into a bit of an issue I'm hoping someone can help me out with. I've searched through this thread and I'm coming up empty.

I made my bootable USB and am using the clover configuration from the-darkvoid here.

When booting the install from clover using the -v argument to see the output and where I'm getting locked up at. That aside I haven't changed anything in the clover options. I left the other boot args in place (darkwake-4 igfxcflbklt=opcode):

VoodooI2CControllerDriver:: pci8086,9d61 Found I2C device: DLL075B
VoodooI2CDeviceNub::Got GPIO Controller! VoodooGPIOSunrisePointLP
Kext com.alexandred.VoodooI@CHID - library kext com.apple.iokit.IOGraphicsFamily not found.
Kext com.alexandred.VoodooI2CHID failed to load (0xdc00000a).
Failed to load ketx com.alexandred.VoodooI2CHID (error 0xdc00000a).
Couldn't alloc class "VoodooI2CHIDDevice"
SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x1d00, Winbond sequence ID=0xffff

Anyone have any ideas on getting past this?

Thanks
 
Last edited:
I use a TP Link AC600 Nano wireless Usb adaptor. Dual Band Wireless 2.4GHz and 5GHz . It Fast, low profile and has good range. https://www.tp-link.com/au/home-networking/adapter/archer-t2u-nano/ . It is Mac Compatible.

I have not seen any usb C wifi. Will have to use Usb C to Usb A converter https://www.ebay.com.au/itm/Adapter-OTG-3-1-USB-C-Converter-Type-C-to-USB-A-3-0-Female-For-Mac-Nexus-5X-6P/132895146723?hash=item1ef12b02e3:m:mrw8dqwIvBt1DgQXgcr2XHw&LH_BIN=1
Looks like I will have to get both adapters to make this work.
Thank you!
 
The newest github build ends with a kernel panic on boot for me, no matter what I do (9360 i7-7500u 1080p, mojave 10.14.4).

Tried to disable some / all kext's, tried to disable some dsdt's - always ends up in a kp.

I've attached some pics that I took using a slow motion function, the text just moves too fast.
 

Attachments

  • Screenshot_20190513-121612_Video Player.jpg
    Screenshot_20190513-121612_Video Player.jpg
    1.2 MB · Views: 116
  • Screenshot_20190513-121809_Video Player.jpg
    Screenshot_20190513-121809_Video Player.jpg
    1.4 MB · Views: 117
  • Screenshot_20190513-121757_Video Player.jpg
    Screenshot_20190513-121757_Video Player.jpg
    1.4 MB · Views: 126
Last edited:
Status
Not open for further replies.
Back
Top