[Guide] Dell XPS 13 9343 Sierra

[RehabMan]

Hello everyone. I'm new to hackintosh and I'm now trying to install sierra onto my xps 13 9343. I created the boot USB and replaced the EFI folder, renamed the files as the guide written. With "Inject Intel" unselected, I cannot boot into installation.
Can anyone help me? Thanks in advance! My clover folder and screenshot are attached.View attachment 278234

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[trifire]

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

ok I will read the "Clover Guide"
but the thing is I did read the problem reporting faq and I did upload my Clover.zip and screenshot as the faq requires me to do.

 

[RehabMan]

ok I will read the "Clover Guide"
but the thing is I did read the problem reporting faq and I did upload my Clover.zip and screenshot as the faq requires me to do.

I looked at your Clover.zip and determined you did not follow the guide.
Hence the suggestion to follow it.

 

[trifire]

I looked at your Clover.zip and determined you did not follow the guide.
Hence the suggestion to follow it.

I followed this XPS 13 9343 guide and it didn't work as I mentioned above. I will try the Clover guide and see if it works.

 

[trifire]

I looked at your Clover.zip and determined you did not follow the guide.
Hence the suggestion to follow it.

I tried to follow the guide but was stuck on a black screen, clover didn't show up. Can you tell me where I did wrong? Sorry for bothering you.

 

[RehabMan]

I tried to follow the guide but was stuck on a black screen, clover didn't show up. Can you tell me where I did wrong? Sorry for bothering you.

Check your BIOS settings.
Make sure you have UEFI enabled, secure boot disabled.
Use a USB2 stick. Try all USB ports.
Make sure you're using your BIOS boot menu (not the same as BIOS setup).

 

[trifire]

Check your BIOS settings.
Make sure you have UEFI enabled, secure boot disabled.
Use a USB2 stick. Try all USB ports.
Make sure you're using your BIOS boot menu (not the same as BIOS setup).

I'm using a USB2 stick and those settings are right.
The USB wasn't shown in the UEFI section of boot menu and I tried to add the boot option in BIOS setup. Still not working.

 

[RehabMan]

I'm using a USB2 stick and those settings are right.
The USB wasn't shown in the UEFI section of boot menu and I tried to add the boot option in BIOS setup. Still not working.

Then your USB was created incorrectly.
What is the output of 'diskutil list' from Terminal with your USB plugged into a working Mac?

 

[trifire]

/dev/disk0 (external, physical):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *84.8 GB disk0

1: EFI EFI 209.7 MB disk0s1

2: Apple_HFS macOS Sierra Final b... 84.0 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3


/dev/disk1 (external, physical):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *31.9 GB disk1

1: EFI EFI 209.7 MB disk1s1

2: Apple_HFS Install macOS Sierra 31.6 GB disk1s2

 

[egore]

deleted