Contribute
Register

[Guide] DELL Inspiron 7560 Mojave Installation

Status
Not open for further replies.
Does Quick Sync work in our system? if yes then how do I check if it is enabled or not?
 
Does Quick Sync work in our system? if yes then how do I check if it is enabled or not?
It enabled by default, but no idea about test function or tool.
 
Last edited:
will lenovo's FRU 04x6020 wifi chip work for dell 7560 mojave?
 
will lenovo's FRU 04x6020 wifi chip work for dell 7560 mojave?
Lenovo FRU 04x6020 is BCM94352Z, so it should work.
But for sure about capabilities, I suggest to buy DW1560.
Same WIFI chip, but more sure can use on DELL's laptop.
 
Hey guys, thanks for this guide! I did it. My dell 7560 officially has OSx Mojave. Now in installing clover to my system's ufi do I have to update 1.7.0 bios or is that if I use YOUR clover setup. Where do I get these kext files?
"
ACPIBatteryManager
AirportBrcmFixup
AppleALC
AppleBacklightFixup
BrcmFirmwareRepo
BrcmPatchRAM2
CodecCommander
FakeSMC (and its child kexts if you needed.)
Lilu
RealtekRTL8111
SATA-unsupported
USBInjectAll
VoodooI2C
VoodooI2CHID
VoodooPS2Controller
WhateverGreen"


Everything seems to be good, i haven't installed the wifi card yet i bought the wrong one so I'm using ethernet. Trackpad doesn't have more gestures but I'll look for your older information on the high sierra to make that work.

Keep on truckin friends!
 
Hey guys, thanks for this guide! I did it. My dell 7560 officially has OSx Mojave. Now in installing clover to my system's ufi do I have to update 1.7.0 bios or is that if I use YOUR clover setup. Where do I get these kext files?
"
ACPIBatteryManager
AirportBrcmFixup
AppleALC
AppleBacklightFixup
BrcmFirmwareRepo
BrcmPatchRAM2
CodecCommander
FakeSMC (and its child kexts if you needed.)
Lilu
RealtekRTL8111
SATA-unsupported
USBInjectAll
VoodooI2C
VoodooI2CHID
VoodooPS2Controller
WhateverGreen"


Everything seems to be good, i haven't installed the wifi card yet i bought the wrong one so I'm using ethernet. Trackpad doesn't have more gestures but I'll look for your older information on the high sierra to make that work.

Keep on truckin friends!
You have to upgrade BIOS version to 1.7.0 if you going to use my DSDT.
Otherwise you have to patch DSDT by yourself.

For these kexts, please google it, or find from RehabMan's bitbucket.
 
Update: 20181121
  • Update Lilu to 1.2.8
  • Update Whatevergreen to 1.2.4
  • Change graph ID to 0x591B
  • Re-patch DSDT based on BIOS version 1.8.0
Note that this time I keep previous config.plist and DSDT.aml for user who wanted to keep their BIOS version or graph ID.
Please read #1 for more detail.

New CLOVER archive has uploaded at #1.
 
Update: 20181121
  • Update Lilu to 1.2.8
  • Update Whatevergreen to 1.2.4
  • Change graph ID to 0x591B
  • Re-patch DSDT based on BIOS version 1.8.0
Note that this time I keep previous config.plist and DSDT.aml for user who wanted to keep their BIOS version or graph ID.
Please read #1 for more detail.

New CLOVER archive has uploaded at #1.
Should i do DSDT patch again after BIOS upgrade?
and about what should i take care while upgrading BIOS
 
Should i do DSDT patch again after BIOS upgrade?
and about what should i take care while upgrading BIOS
I tested the 1.7.0's DSDT after upgrade BIOS to 1.8.0, and it can boot into OS X without issue.
But still suggest re-patch again.

And nothing to take care while upgrading BIOS, just don't shutoff the laptop during the process.
 
I tested the 1.7.0's DSDT after upgrade BIOS to 1.8.0, and it can boot into OS X without issue.
But still suggest re-patch again.

And nothing to take care while upgrading BIOS, just don't shutoff the laptop during the process.
okay, do I need to do DVMT patch again?
 
Status
Not open for further replies.
Back
Top