[Guide] DELL Inspiron 7560 Mojave Installation

[Ketanr]

No idea about that.
Perhaps the battery is really have a problem, if included battery drained you talk about before.
And as I known, Windows will not going to detect the battery problem that critical degraded.

Is there any way i can clear the battery data, because i did the test told by dell care on windows and even on dell diagnostic and they told me that the battery is not damaged, it is as it should be

 

[missile0407]

Is there any way i can clear the battery data, because i did the test told by dell care on windows and even on dell diagnostic and they told me that the battery is not damaged, it is as it should be

Try to reset the CR2032 battery.
I have no idea if still a same.

 

[Ketanr]

Try to reset the CR2032 battery.
I have no idea if still a same.

Solved

By using the laptop until it shutdown by itself because of low battery and then charging it after about 6-7 hours.
Battery status- Goid

 

[Ketanr]

Does Quick Sync work in our system? if yes then how do I check if it is enabled or not?

 

[missile0407]

Does Quick Sync work in our system? if yes then how do I check if it is enabled or not?

It enabled by default, but no idea about test function or tool.

 

[Ketanr]

will lenovo's FRU 04x6020 wifi chip work for dell 7560 mojave?

 

[missile0407]

will lenovo's FRU 04x6020 wifi chip work for dell 7560 mojave?

Lenovo FRU 04x6020 is BCM94352Z, so it should work.
But for sure about capabilities, I suggest to buy DW1560.
Same WIFI chip, but more sure can use on DELL's laptop.

 

[tiptophasegawa]

Hey guys, thanks for this guide! I did it. My dell 7560 officially has OSx Mojave. Now in installing clover to my system's ufi do I have to update 1.7.0 bios or is that if I use YOUR clover setup. Where do I get these kext files?
"
ACPIBatteryManager
AirportBrcmFixup
AppleALC
AppleBacklightFixup
BrcmFirmwareRepo
BrcmPatchRAM2
CodecCommander
FakeSMC (and its child kexts if you needed.)
Lilu
RealtekRTL8111
SATA-unsupported
USBInjectAll
VoodooI2C
VoodooI2CHID
VoodooPS2Controller
WhateverGreen"


Everything seems to be good, i haven't installed the wifi card yet i bought the wrong one so I'm using ethernet. Trackpad doesn't have more gestures but I'll look for your older information on the high sierra to make that work.

Keep on truckin friends!

 

[missile0407]

Hey guys, thanks for this guide! I did it. My dell 7560 officially has OSx Mojave. Now in installing clover to my system's ufi do I have to update 1.7.0 bios or is that if I use YOUR clover setup. Where do I get these kext files?
"
ACPIBatteryManager
AirportBrcmFixup
AppleALC
AppleBacklightFixup
BrcmFirmwareRepo
BrcmPatchRAM2
CodecCommander
FakeSMC (and its child kexts if you needed.)
Lilu
RealtekRTL8111
SATA-unsupported
USBInjectAll
VoodooI2C
VoodooI2CHID
VoodooPS2Controller
WhateverGreen"


Everything seems to be good, i haven't installed the wifi card yet i bought the wrong one so I'm using ethernet. Trackpad doesn't have more gestures but I'll look for your older information on the high sierra to make that work.

Keep on truckin friends!

You have to upgrade BIOS version to 1.7.0 if you going to use my DSDT.
Otherwise you have to patch DSDT by yourself.

For these kexts, please google it, or find from RehabMan's bitbucket.

 

[missile0407]

Update: 20181121

• Update Lilu to 1.2.8
• Update Whatevergreen to 1.2.4
• Change graph ID to 0x591B
• Re-patch DSDT based on BIOS version 1.8.0

Note that this time I keep previous config.plist and DSDT.aml for user who wanted to keep their BIOS version or graph ID.
Please read #1 for more detail.

New CLOVER archive has uploaded at #1.