Contribute
Register

[Guide] Dell Inspiron 3x37 - 5x37 -7x37 Clover, Yosemite/El Capitan

Status
Not open for further replies.
This is my config.plist ... can you take a look please?
 

Attachments

  • config.plist
    7.4 KB · Views: 193
clau30 said:
This is my config.plist ... can you take a look please?
Click to expand...

It is not according to my guide.
Build a USB according to the Sierra guide and update via USB.
 
finally i succesfully updated it, but my graphics is broken. why? what should i do? it recognizes my hd4400 but with only 7MB.

PS: Uploaded Clover+IOReg
 

Attachments

  • Archive.zip
    3.6 MB · Views: 73
Last edited:
clau30 said:
finally i succesfully updated it, but my graphics is broken. why? what should i do? it recognizes my hd4400 but with only 7MB.

PS: Uploaded Clover+IOReg
Click to expand...

You are not booting from the EFI/Clover you attached here.
 
Its something strange...Grahics/Audio dont work because im booting from another EFI (not from the good one, like you said) I have a SSD where i installed Sierra over ElCapitan, and an USB device made with UniBeast which contains Sierra installer. I can boot only from the USB, dont know why. What i already did:

-Install Clover on SSD
-Instal Multibeast on SSD
-Copy EFI folder from USB to SSD

Nothing works. Can you help me please? See diskutil list below.

Code: 
Claus-MacBook-Pro:~ clau$ diskutil list
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS OS X                    94.9 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:                  Apple_HFS Install macOS Sierra    154.2 GB   disk0s4

/dev/disk1 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *16.1 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Untitled 1              15.8 GB    disk1s2
 
clau30 said:
Its something strange...Grahics/Audio dont work because im booting from another EFI (not from the good one, like you said) I have a SSD where i installed Sierra over ElCapitan, and an USB device made with UniBeast which contains Sierra installer. I can boot only from the USB, dont know why. What i already did:

-Install Clover on SSD
-Instal Multibeast on SSD
-Copy EFI folder from USB to SSD

Nothing works. Can you help me please? See diskutil list below.

Code: 
Claus-MacBook-Pro:~ clau$ diskutil list
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS OS X                    94.9 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:                  Apple_HFS Install macOS Sierra    154.2 GB   disk0s4

/dev/disk1 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *16.1 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Untitled 1              15.8 GB    disk1s2
Click to expand...

What is the issue when you attempt to boot without the USB?
 
This one. BIOS is set to UEFI , secure boot off, ahci mode (elcapitan works like a charm with these bios settings).
 

Attachments

  • IMG_2283.JPG
    IMG_2283.JPG
    1.4 MB · Views: 77
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top