- Joined
- Nov 6, 2019
- Messages
- 8
- Motherboard
- Dell Inspiron 15 7559-Clover
- CPU
- i5-6300HQ
- Graphics
- GTX 960M
I've been trying Mojave. Maybe I need to try an older version or something? Idk, I'm working on installing it on an old HP desktop I've got now.
As per rules, please update your hardware profile to allow others to help you easierI think you misunderstood me, I was working on a Dell 15 7559 and have all but given up. I meant I have moved on to working on an HP that I have as well.
Hi. I have tried copying your clove to try it on my 7559 i5 6300HQ laptop. But still having an error to the startiny screen ... my FHD screen has to change anything about the screen parameters to go through that step?I posted this on another thread. Try this.
I was getting the same error (stuck on start initdevicetree) installing Mojave 10.14.5 on my dell 7559. (Bios 1.2.9). I tried a lot of different options in bios, different usbs, plugging and unplugging chargers etc. Here is what worked for me (UHD model, 16 gb if that matters)(also installed on hdd)
1. The recommended settings (DISABLE: vt for direct i/o, advanced battery charge mode, support assist system resolution, firmware tpm, secure boot)(ENABLE: load legacy rom option)(OPROM setting enabled (when u click on the option it shows the option to disable and says boot mode is set to: UEFI with legacy OPROM; secure boot: OFF)
2. Used USB 2, AC charger connected
3. Used this clover folder(replace the files on your efi/clover with the files in the folder I attached and check (worked for me).
Good luck.
Have you tried and succeeded yet?
I have copied yours and have failedI have 1.3.0.
Try updating to that and replace your EFI with the one attached, it's worked for many people.