Contribute
Register

[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) Using Clover

Status
Not open for further replies.
And in this link is the result of that. Progress at least...

I also included images of the options menu, graphics menu, and PCI devices menu.

Did you try without HFSPlus.efi and VBoxHFS.efi instead? (it is also in the guide).
 
Isn't it disabled by the config.plist?

If you are referring to VboxHFS, yes. To use it you have to remove that setting (it is mentioned in the guide).
 
You did not follow the guide I linked. Try following it exactly.
i tried following the guide and i again have problem:
13184635_1071818302864231_543101417_o.jpg
 

Attachments

  • EFI.zip
    3.8 MB · Views: 228
i tried following the guide and i again have problem:
View attachment 194662

As per guide, try with VboxHFS instead of HFSPlus.

Also, make sure you try all USB ports, both with USB2 and USB3 stick (that stop can be because of USB...)

Also, you might try older versions of Clover (latest is not always best).
 
As per guide, try with VboxHFS instead of HFSPlus.

Also, make sure you try all USB ports, both with USB2 and USB3 stick (that stop can be because of USB...)

Also, you might try older versions of Clover (latest is not always best).

Would you be able to post the VboxHFS file? My version of clover won't load it nor will unibeast.
 
Would you be able to post the VboxHFS file? My version of clover won't load it nor will unibeast.

If you remove HFSPlus.efi, the Clover installer will install it.

It is also probably in the Clover ISO.
 
If you remove HFSPlus.efi, the Clover installer will install it.

It is also probably in the Clover ISO.
thanks sir. I tried with usb3, usb2, replace HFSplus.efi<->VboxHFS, and many methods but still not run.
with OsxAptioFixDrv-64.efi so status is using relock block: yes in clover
with OsxAptioFix2Drv-64.efi so status is using relock block: no in clover
 
Last edited:
Status
Not open for further replies.
Back
Top