- Joined
- Jan 9, 2016
- Messages
- 119
- Motherboard
- Cube mix plus
- CPU
- M3-7y30
- Graphics
- HD 615, 1920 × 1080
Moved in Catalina Laptop Guides
https://www.tonymacx86.com/threads/guide-alldo-cube-mix-plus-catalina-10-15.290064/
-------------------------
HI, this is not properly a guide but I'm sharing with you the conf to make Mojave work on the Cube Mix Plus.
Specifications:
CPU m37y-30
4go ddr3l
m2 Sata foresee 128 go
intel micros secure card
alc283
intel 3165 dual channel a/c combo wifi/bt
usb-c
micro-usb
SVIO front and rear camera
FTSC1000 touchscreen
WCOM4002 pen
Dock keyboard usb, ps/2 touchpad
usb3 on dock
battery dual Intel SR 1 Real Battery
Working:
All except things aren't working
Not working:
Internal card reader(intel one, no hope)
wifi card(still intel stuff, no hope too but bluetooth works fine)
Dock trackpad
Cameras(i2c, no way)
Audio shortcut on the keyboard
Bugs:
Sometimes(50% of the times) the screen become black after boot, you need to wait some minutes that the tablet goes to sleep and then wake it tapping on the power button.
Every boot you have to press twice the "caps lock" to make the keyboard working properly.
Configuration and installation:
Boot bios and:
-enable CSM and set as "Boot Option Filter" "UEFI and Legacy"
-set in chipset - System Agent (SA) Configuration - Graphics Configuration - DVMT Pre-Allocated as 64M.
-no need to disable vt-d , clover disables it with "dart=0"
-I advise also to enable Thunderbolt (TM) Support to enable the type-c port.
-I advise also (if you have the "chinese" version of the tablet) to do BIOS -> Boot -> Quick boot -> Disable and get rid of the Chinese logo. Thanks to @asusceleron
Now let's install osx.
Use Rehab's guide to make a bootable installer of Mojave(Use APTIOMEMORYFIX)
Boot in system and, after you installed Clover as Rehab's Guide, mount efi and go to clover folder(/EFI/EFI/CLOVER).
To mount efi:
Open terminal and type:
Replace the config.plist with the one on my zip, then copy the file SSDT-MixPlus.aml in CLOVER/ACPI/patched.
After that copy the kext in "install kext" on desktop and install them in /L/E/ with kextbeast.
Open the terminal and type:
Modify your config.plist smbios (I sent you one config.plist with a void smbios. Use MacBook10,1).
If you have some graphics trouble try to inject a custom EDID.
Reboot and enjoy your installation.
Please, for every support request use gen_debug and describe your problem.
NOTE:
AppleALC in "install kexts" is a modified version of it to enable the mic, If you replace (or update) your AppleALC kext with the original version you'll lose the mic.
A big thanks to @zhangguangcai that fixed a lot of things (including audio) up to High Sierra.
If you come from a stock Cube(or AlldoCube) Mix Plus you probably have a 100 mb efi partition. I suggest you to upgrade this size to 260 using windows and MiniPartitionTool(if you want help just ask)
https://www.tonymacx86.com/threads/guide-alldo-cube-mix-plus-catalina-10-15.290064/
-------------------------
HI, this is not properly a guide but I'm sharing with you the conf to make Mojave work on the Cube Mix Plus.
Specifications:
CPU m37y-30
4go ddr3l
m2 Sata foresee 128 go
intel micros secure card
alc283
intel 3165 dual channel a/c combo wifi/bt
usb-c
micro-usb
SVIO front and rear camera
FTSC1000 touchscreen
WCOM4002 pen
Dock keyboard usb, ps/2 touchpad
usb3 on dock
battery dual Intel SR 1 Real Battery
Working:
All except things aren't working
Not working:
Internal card reader(intel one, no hope)
wifi card(still intel stuff, no hope too but bluetooth works fine)
Dock trackpad
Cameras(i2c, no way)
Audio shortcut on the keyboard
Bugs:
Sometimes(50% of the times) the screen become black after boot, you need to wait some minutes that the tablet goes to sleep and then wake it tapping on the power button.
Every boot you have to press twice the "caps lock" to make the keyboard working properly.
Configuration and installation:
Boot bios and:
-enable CSM and set as "Boot Option Filter" "UEFI and Legacy"
-set in chipset - System Agent (SA) Configuration - Graphics Configuration - DVMT Pre-Allocated as 64M.
-no need to disable vt-d , clover disables it with "dart=0"
-I advise also to enable Thunderbolt (TM) Support to enable the type-c port.
-I advise also (if you have the "chinese" version of the tablet) to do BIOS -> Boot -> Quick boot -> Disable and get rid of the Chinese logo. Thanks to @asusceleron
Now let's install osx.
Use Rehab's guide to make a bootable installer of Mojave(Use APTIOMEMORYFIX)
Boot in system and, after you installed Clover as Rehab's Guide, mount efi and go to clover folder(/EFI/EFI/CLOVER).
To mount efi:
Open terminal and type:
Code:
sudo -s
#type your password and press enter
diskutil mount EFI
Replace the config.plist with the one on my zip, then copy the file SSDT-MixPlus.aml in CLOVER/ACPI/patched.
After that copy the kext in "install kext" on desktop and install them in /L/E/ with kextbeast.
Open the terminal and type:
Code:
sudo -s
#type your password and enter
cd /System/Library/Extensions
rm -r AppleIntelLpssI2C.kext
rm -r AppleIntelLpssI2CController.kext
rm -r AppleHPM.kext
kextcache -i /
Modify your config.plist smbios (I sent you one config.plist with a void smbios. Use MacBook10,1).
If you have some graphics trouble try to inject a custom EDID.
Reboot and enjoy your installation.
Please, for every support request use gen_debug and describe your problem.
NOTE:
AppleALC in "install kexts" is a modified version of it to enable the mic, If you replace (or update) your AppleALC kext with the original version you'll lose the mic.
A big thanks to @zhangguangcai that fixed a lot of things (including audio) up to High Sierra.
If you come from a stock Cube(or AlldoCube) Mix Plus you probably have a 100 mb efi partition. I suggest you to upgrade this size to 260 using windows and MiniPartitionTool(if you want help just ask)
Attachments
Last edited: