- Joined
- Sep 27, 2012
- Messages
- 334
- Motherboard
- Asrock Z270X ITX Fatality
- CPU
- I7-7700K
- Graphics
- HD 630 + RX 560
- Mac
- Mobile Phone
*Solved at #3150 To update, I tried downgrading my bios to 1.2(original release) which solves the usb eject issue, but this introduced a new problem, USB2.0 devices populate both HXC(SS/HS) ports, creating 22 ports total. There is also the USR1 that gets simultaneously populated by some devices. The Rubber 3.0 device is the USB3.0 one, g600 and i1display are USB2.0.
It wakes to a coma from sleep and can only be turned back on by holding power button down to kill it and booting from scratch. It woke up once on the first boot (unsure how) but won't anymore. It also keeps the blinking power led of sleep forever, as in after post as well. Coming back from sleep had solved it that once but another coma put it right back to always blinking. I tried with my old SSDT-UIAC to no avail.
How do I prune them, do I just get rid of the extra SS ports that the usb2.0 devices map to and keep only the SS that showed up when I plugged in a usb device? Likewise for the HS? You can see in the usbmap screenshot
Here's a link to ioreg, dsdt, efi folders. The EFI contains a ssdt-uiac but is disabled as I wasn't sure it would map after the bios update. The screenshot is with limit removal + EC/USBX patches.
*Further Update #1
Updating the bios to beta 1.21 (from shortly after the release of the motherboard, original being 1.20) fixes sleep and wakeup, and USB devices appear like they did with Bios 2.5 Where SS06 => HS11 in terms of plugging usb2 and usb3 in the same drive. Unfortunately, it also brings back the eject issue. I got ACPI dumps and Ioreg copies saved for 1.20 and 1.21 thinking maybe it would help solve the usb eject issue in the future since the only difference between them is small bios wise. Mainly visible in osx is that HS and SS ports match in number for the same port
It wakes to a coma from sleep and can only be turned back on by holding power button down to kill it and booting from scratch. It woke up once on the first boot (unsure how) but won't anymore. It also keeps the blinking power led of sleep forever, as in after post as well. Coming back from sleep had solved it that once but another coma put it right back to always blinking. I tried with my old SSDT-UIAC to no avail.
How do I prune them, do I just get rid of the extra SS ports that the usb2.0 devices map to and keep only the SS that showed up when I plugged in a usb device? Likewise for the HS? You can see in the usbmap screenshot
Here's a link to ioreg, dsdt, efi folders. The EFI contains a ssdt-uiac but is disabled as I wasn't sure it would map after the bios update. The screenshot is with limit removal + EC/USBX patches.
*Further Update #1
Updating the bios to beta 1.21 (from shortly after the release of the motherboard, original being 1.20) fixes sleep and wakeup, and USB devices appear like they did with Bios 2.5 Where SS06 => HS11 in terms of plugging usb2 and usb3 in the same drive. Unfortunately, it also brings back the eject issue. I got ACPI dumps and Ioreg copies saved for 1.20 and 1.21 thinking maybe it would help solve the usb eject issue in the future since the only difference between them is small bios wise. Mainly visible in osx is that HS and SS ports match in number for the same port
Attachments
Last edited: