Spending way too much time on this, so looking for some help trying to figure out whether I should be using the 0 or 255 connector type for my HS13 and HS14 ports.
These ports represent the USB 2.0 header on my Z270 Maximus IX Hero MB. I have a
NZXT USB Internal Hub connected to this header. From there, I have an "
Apple Broadcom BCM94360CD – 802.11 a/b/g/n/ac with Bluetooth 4.0" card connected to one connector on the hub, and the case's front panel USB ports connected to another connector on the hub.
In reviewing IORegistryExplorer, I can see that the hub itself shows up under HS13 and HS14. The Wifi/Bluetooth card shows up under HS14 only. And, when something is connected to the front case connectors (2) they show up under HS13 only.
I've tried using 0 and 255 connectors type for both or some combination of the two, and can't notice a functional difference. Based on this description, and the attached ioregistry (where right now both are set to 0),
what should my connector types be for these two ports?
Thank you!