- Joined
- Jul 4, 2013
- Messages
- 101
- Motherboard
- ASRock DeskMeet X300
- CPU
- Ryzen 5700G
- Graphics
- Vega 8
Thank you for responding!
gen_debug files are attached. It is too hot here in Spain nowadays, 32º ambient temperature. Fan doesn't makes much noise, because the fan speed increases when there is load on the CPU, but if you touch the chassis, it is really hot.
Here are the temperatures when idle:
And the last one, yesterday arrived the DW1560 WiFi + Bluetooth card. Installed correctly and was working in OpenCore without problems, but when I changed it to your latest CLOVER EFI folder to send debug info to you, bluetooth is not working (The BCM bluetooth device is not seen in the USB devices on System information). Do you know how to change it?
Thank you very much for your help!
gen_debug files are attached. It is too hot here in Spain nowadays, 32º ambient temperature. Fan doesn't makes much noise, because the fan speed increases when there is load on the CPU, but if you touch the chassis, it is really hot.
Here are the temperatures when idle:
- What are idle temps in Windows 10 and how do they compare to Catalina idle temps? I can install Windows and test it, but I use macOS daily to work, so cannot do this until the weekend.
- Is the fan working properly without any obstructions of the front and rear vents? Yes, it is working correctly. If it is important, I have the prodesk mini installed on the vertical stand.
- What is the ambient temp (office temp around the unit)? 32º Celsius
- If 1-3 reveal no issues, do this at your own risk: Remove the heat sink, clean the old thermal paste and properly apply AS5 or your favorite thermal paste. If you want, please take a look on the debug files. If you don't see any problems there, I will change the thermal paste to see if it improves.
And the last one, yesterday arrived the DW1560 WiFi + Bluetooth card. Installed correctly and was working in OpenCore without problems, but when I changed it to your latest CLOVER EFI folder to send debug info to you, bluetooth is not working (The BCM bluetooth device is not seen in the USB devices on System information). Do you know how to change it?
Thank you very much for your help!