Contribute
Register

[Guide] Booting The USB Installer Using OpenCore

Joined
Sep 20, 2011
Messages
105
Motherboard
Gigabyte Z370M D3H
CPU
i5-8600K
Graphics
RX 580
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
you do the part of the guide after you have installed macOS
Thanks, I just look at any possibilities. Seems not to promising so far. This AppleIntelLpssI2CController is a pain. fTimerserviceMatching timed out fNotification 0, what does it mean?
I tried to add SSDT_XOSI and also SSDT-GPIO amls to ACPI folder..but then it immediately halts on "critical error"
 
Joined
May 13, 2011
Messages
7
Motherboard
HP Zbook G4
CPU
i7-7500U
Graphics
intel HD 620, 1920 x 1080
Mac
  1. MacBook Pro
I have HP Zbook G4 and I got stuck at the same place. Tried different combinations but none of them have helped. I have been trying for the last one month and no success yet.

Lspci from zbook G4

ubuntu@ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #2 [8086:9d11] (rev f1)
00:1c.3 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #4 [8086:9d13] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point LPC Controller/eSPI Controller [8086:9d4e] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (4) I219-V [8086:15d8] (rev 21)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78)
03:00.0 Non-Volatile memory controller [0108]: Intel Corporation SSD Pro 7600p/760p/E 6100p Series [8086:f1a6] (rev 03)


The output on the boot screen is also similar:

ACPI Error: [\_PR_.CPU0] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-292)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-310)
ACPI Exception: AE_NOT_FOUND. (SSDT: CpuPlug) while loading table (20160930/tbxfload-319)
ACPI Error: 1 table load failures, 17 successful (20168938/tbxfload-342)
AppleACPICPU: Processor Id=1 LocalfpicId=0 Enabled
AppleACPICPU: Processor Id=2 LocalfpicId=2 Enabled
AppleACPICPU: Processor Id=3 LocalfpicId=1 Enabled
AppleACPICPU: Processor Id=4 LocalfpicId=3 Enabled
AppleACPICPU: Processor Id=5 LocalipicId=255 Disabled
AppleACPICPU: Processor Id=6 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=7 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=8 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=9 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=10 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=11 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=12 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=13 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=14 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=15 LocalfpicId=255 Disabled
AppleACPICPU: Processor Id=16 LocalfpicId=255 Disabled
calling npo_policy_init for AMFI
Security policy loaded: Apple Mobile File Integrity (AMFI)
calling npo_policy_init for Sandbox
Security policy Loaded: Seatbelt sandbox policy (Sandbox)
calling apo_policy_init for Quarantine
Security policy Loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Darwin Image4 Validator Version 2.2.0: Thu Oct 29 23:03:20 PDT 2020; root:AppleImage4-61.60.4-3461/Apple Image4/RELEASE_X86_64
ACPI Warning: GPE L69 has no implementation IOAPIC: Version 0x20 Vectors 64:111 ACPI Exception: HE BAD PARAMETER, Could not install Pci Config handler for Root Bridge PCI0 (20160930/evrgnini-340)
(20160930/evgpeinit-465)
ACPI: Executed 60 blocks of module-level executable AML code
ACPI: sleep states S3 S4 S5 HID: Legacy shin 2
HID: Legacy shin 2 pci (build 23:15:27 Oct 29 2020), flags 8x20c3080
Virtual SHC efend: @authenticated restart support is unavailable (800000000000000E, 8)
ACPI Exception: RE BAD PARAMETER, Returned by Handler for [EmbeddedControl] (20160930/evregion-388)
[ITLB] @00001 #002D: BFC
No Local Variables are initialized for method [ITLB]
[ PCI configuration begin ]

No Arguments are initialized for method [ITLB]

ACPI Error: Method parse/execution failed [_SB.PCI0.LPCB.EC0.ITLB] (Node ffffff805d739ae0), RE_BAD_PARAMETER (20160930/psparse-632)
ACPI Error: Method parse/executlon falled [_SB.PCI0.LPCB.EC0.ECRIconsole relocated to 0x1c00000000
[ PCI configuration end, bridges 4, devices 16 ]
Apple IntellpssI2C-1::init12CGplo: no ISOL, validateObject returned 0xe00002bc
Apple IntelLpssI2C-1::init 12CGplo: no ISOL, validateObject returned 0xe00002bc
Apple IntelLpssI2CController-1:: notificationPublishedHandler: getChannel Number failed
AppleNVMe Assert failed: (0 != data ) Release IDNode file: /AppleInternal/BuildRoot/Library/Caches/com.apple.xbs/Sources/IONVMeFamil Ly/IONVMeFamily-470.100.17/IONVMeController.cpp line: 5478
virtual IOReturn IONVMeController::CreateSubmissionQueue (uint16_t, uint8_t): :2861:SQ index=0 entrysize=64
virtual IOReturn IONVMeController::CreateSubmissionQueue (uint 16 t, uint8_t): :2861:SQ index=1 entrysize=64
apfs_module_start:1689: Load: com.apple.filesystems.apfs, v1412.141.1, apfs-1412.141.1, 2020/10/30
Apple IntelLpssI2CController-1::_notificationPublishedHandler: getChannelNumber failed
Apple IntelLpssI2CController-1::_notificationPublishedHandler: getChannelNumber failed
Apple IntelLpssI2CController-1::_notificationPublishedHandler: getChannelNumber falled
ApplePS2Controller: Notification consumer published: ApplePS2Controller
ApplePS2Controller: Notification consumer published: ApplePS2Keyboard
ApplePS2Controller: Timed out on mouse input stream.
ApplePS2Controller: Timed out on mouse input stream.
VoodooPS2 Trackpad: Identify TouchPad command returned incorrect byte 2 (of 3): 0x00
ApplePS2Controller: Notification consumer published: ApplePS2Mouse
Apple IntelLpssI2CController::_serviceMatchingTimeSubr: Timer ServiceMatching timed out, fNotifications 0
Apple IntelLpssI2CController::_serviceMatchingTimeSubr: fTimer ServiceMatching timed out, fNotifications 0
 

Attachments

  • 20220113_073352.jpg
    20220113_073352.jpg
    1.5 MB · Views: 56
Last edited:

Feartech

Moderator
Joined
Aug 3, 2013
Messages
27,558
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
I have HP Zbook G4 and I got stuck at the same place. Tried different combinations but none of them have helped. I have been trying for the last one month and no success yet.

Lspci from zbook G4

ubuntu@ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620 [8086:5916] (rev 02)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #2 [8086:9d11] (rev f1)
00:1c.3 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #4 [8086:9d13] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point LPC Controller/eSPI Controller [8086:9d4e] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (4) I219-V [8086:15d8] (rev 21)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78)
03:00.0 Non-Volatile memory controller [0108]: Intel Corporation SSD Pro 7600p/760p/E 6100p Series [8086:f1a6] (rev 03)
please update your hardware profile to allow others to help you easier

read the faq for proper hardware profile setup:
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
27,558
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Post 1 has been updated with latest OpenCore 0.7.8 and updated kexts
 
Joined
May 8, 2022
Messages
1
Motherboard
Lenovo Thinkpad T460
CPU
i5 > Need full model number > See Rules!
Graphics
> Need model name or version number > See Rules!

Feartech

Moderator
Joined
Aug 3, 2013
Messages
27,558
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
hi,

i install big sur and monterey on my t460 with this tutorial:

i cant get usb to work, what i need to do?
 
Joined
Sep 18, 2012
Messages
871
Motherboard
HP EliteBook_8x0G1
CPU
i7-4600U
Graphics
HD 4400, 1366 x 768
Once you have Catalina installed and the above USBPorts.kext correctly configured, then you can update to latest OpenCore and kexts and then upgrade to Big Sur or Monterey

Thanks for this guide.

Tried to follow it, along side the info from dortanias guide to make a osx 12.4 complete fresh new clean install usb and zero installed system. fail.


Laptop Configurations

Important


For HP user's, you must set the following to true in your config.plist:
LapicKernelPanic
UnblockFsConnect



Haswell
Device Properties - Add - PciRoot(0x0)/Pci(0x2,0x0)
AAPL,ig-platform-id -> 0500260A (for HD5000, HD5100 and HD5200)
AAPL,ig-platform-id -> 0600260A (for HD4200, HD4400 and HD4600)
device-id -> 12040000 (for HD4200, HD4400 and HD4600 ONLY)

kernel - quirks:
enable:
DisableIoMapper
PanicNoKextDump
PowerTimeoutKernelPanic

SystemProductName:
MacBookPro11,1


UEFI -> Quirks:
enable:
IgnoreInvalidFlexRatio
ReleaseUsbOwnership

for osx 12.4, best to change to MacBookPro11,4 or newer including 12,1 etc.

test installs on hold. not sure if dortania's opencore guide needs to be updated at the time

tested with opencore 0.7.8, and osx 12.4,

then again with opencore 0.8.0 and osx 12.4 , both failed to boot.
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
27,558
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Thanks for this guide.

Tried to follow it, along side the info from dortanias guide to make a osx 12.4 complete fresh new clean install usb and zero installed system. fail.








for osx 12.4, best to change to MacBookPro11,4 or newer including 12,1 etc.

test installs on hold. not sure if dortania's opencore guide needs to be updated at the time

tested with opencore 0.7.8, and osx 12.4,

then again with opencore 0.8.0 and osx 12.4 , both failed to boot.
try with Catalina as mentioned
 
Joined
Sep 28, 2011
Messages
226
Motherboard
Lenovo T440p - OpenCore
CPU
i7-4600M
Graphics
HD 4600 - GT 730M
Classic Mac
  1. iMac
Mobile Phone
  1. iOS
Hello!
My first installation started on russian language. Solved reseting NVRAM settings

Buy now installer says: internet connection is required to install macos.
Internet access is mandatory? I dont have network kext yet
 

UtterDisbelief

Moderator
Joined
Feb 13, 2012
Messages
8,016
Motherboard
Gigabyte Z590i Aorus Ultra - OC 0.8.0
CPU
i5-10600k
Graphics
Dell RX560
Mac
  1. iMac
  2. Mac mini
Classic Mac
  1. eMac
  2. iBook
Mobile Phone
  1. iOS
Hello!
My first installation started on russian language. Solved reseting NVRAM settings

Buy now installer says: internet connection is required to install macos.
Internet access is mandatory? I dont have network kext yet

Hi there.

You need an Internet connection if you are using the Recovery installer rather than the Full one.

If you download the full installer from either the App Store or Apple's support web-site then you have the complete version which is standalone and does not require an Internet connection.

So basically ... How did you get the macOS installer?

:)
 
Top