Contribute
Register

[Guide] Booting The USB Installer Using OpenCore

My MSI Modern 14 is stuck since 10mins. I configured everything right. I checked everything 2 times.
20210309_182038.jpg
 
MSI Modern 14 with i5-10210U
please read the faq for proper hardware profile setup:
 
please read the faq for proper hardware profile setup:
I read this thread already and found nothing that I've done wrong. The only thing I changed is the stuff for dual boot with Windows 10
 
I read this thread already and found nothing that I've done wrong.
your hardware profile lists a desktop hardware

re read the faq linked above and update your hardware profile with your laptop specs properly please
 
your hardware profile lists a desktop hardware

re read the faq linked above and update your hardware profile with your laptop specs properly please
I changed the config file with the program mentioned to the Comet Lake stuff in your 2. post. I didn't found anything in the FAQ.

Edit: Changed it to my laptop hardware
 
Last edited:
I changed the config file with the program mentioned to the Comet Lake stuff in your 2. post. I didn't found anything in the FAQ.

Edit: Changed it to my laptop hardware
zip and upload your OC folder
 
Here my OC folder:
Edit: Changed the Booter Quirks:
DevirtualiseMmio, ProtectUefiServices, RebuildAppleMemoryMap, SyncRuntimePermissions. They were disbaled. Could that been the problem?
 

Attachments

  • OC.zip
    2.7 MB · Views: 46
Back
Top