[Guide] Booting the OS X installer on LAPTOPS with Clover

[Feartech]

I try with and without. Now i Remove the ktext you tell me but on safe mode I have the same error :

error : cpu 2 caller

boot verbose and take a pic to upload here

 

[yota79]

Here the error on safe mode start and verbose:

 

[Feartech]

Here the error on safe mode start and verbose:

View attachment 423460

you have 2 ApfsDriverLoader's in drivers/UEFI remove ApfsDriverLoader-64

drivers64 and drivers64UEFI folders should be removed

USBInjectAll.kext would be a good idea

try using the config.plist from the guide untouched, meaning don't make any changes

 

[yota79]

I removed the ApfsDriverLoader-64 from the folder.

Also deleted the 2 folders and add the USBInjectAll.kext

I have the same error, but with the cpu 3 caller, i post a screen and add the new EFI Folder.

Also use the untuched config_HD615_620_630_640_650.plist

 

[Feartech]

I removed the ApfsDriverLoader-64 from the folder.

Also deleted the 2 folders and add the USBInjectAll.kext

I have the same error, but with the cpu 3 caller, i post a screen and add the new EFI Folder.

Also use the untuched config_HD615_620_630_640_650.plist

View attachment 423465

your hardware profile says Lenovo but i can see asuspro on your image

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

 

[yota79]

yes , the my lenovo was broken and now i have this one.

I changed my profile with the new hardware.

Now... what I have to do?

This is the lspci from linux ( the linux boot from usb-c with adapter in 10 seconds it's very fast).

 

[yota79]

PERHAPS SOLVED : I try also to use VirtualSMC (but with the same result), after i use the kext VoodooTSCSync in Other Folder and now after the verbose the installation screen appears.

Now I ask : When I finish the installation ( now I have to test if it's work until the end) it's better to use the FakeSMC or remaining on the VirtualSMC ?

 

[Feartech]

it's better to use the FakeSMC or remaining on the VirtualSMC ?

whichever one works

 

[yota79]

Other notebook.... other problem.

Now I have a DELL , and I try to install with this modification:

1) Enable DELL Patch

I use also the VirtualSMC but after a start with a discovery of USB ( I try with GenericUSBXHCI.kext and with USBInjectAll.kext ) and after I remove... the system start but after a minutes going to panic with this screen:

How to remove the glitch?

IMG-1883 hosted at ImgBB

Image IMG-1883 hosted in ImgBB

ibb.co

IMG-1882 hosted at ImgBB

Image IMG-1882 hosted in ImgBB

ibb.co

 

[Dysfunctional]

Can i get wifi working on my HP Laptop? Wifi adapter is Ralink RT-3290 802.11bgn?
Greetings.