[Guide] Booting the OS X installer on LAPTOPS with Clover

[RehabMan]

trying to install on my PCspecialist laptop. clover working fine but when i try and boot into the installer this happens and nothing else?
View attachment 199485

afité Silver Aluminium Chassis: 13.3" Matte Full HD IPS LED (1920 x 1080)
Processor (CPU) Intel® Core™ i5 Dual Core Processor i5-6200U (2.30GHz, 2.8GHz Turbo)
Memory (RAM) 8GB KINGSTON SODIMM DDR3 1600MHz (1 x 8GB)
Graphics Card INTEL® HD GRAPHICS 510 [Pentium] | INTEL® HD GRAPHICS 520 [Core™]
2nd Graphics Card NONE
Memory - Hard Disk NONE
M.2 SSD Drive 128GB SAMSUNG SM951 M.2, PCIe NVMe (up to 2000MB/R, 650MB/W)
External DVD/BLU-RAY Drive NONE
Memory Card Reader Integrated 2 in 1 Memory Card Reader (SD, MMC)
Sound Card Realtek 2 Channel High Definition Audio + MIC/Headphone Jack
Bluetooth & Wireless WIRELESS INTEL® AC-8260 M.2 (867Mbps, 802.11AC) + BLUETOOTH
LAN/Ethernet Adapter NONE
USB Options

Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[jsproule899]

Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[RehabMan]

View attachment 199489

Image of EFI/Clover not requested.

Attach actual EFI/Clover as ZIP (remove themes).

But from your image, it is clear you didn't follow the guide. Read post #1. Carefully.

 

[masud.xen]

Installing to the HDD/SSD after installation is very similar to installing to the USB. Refer back to this section when you get to that stage.

I can't able to boot from SSD. I've installed clover as mentioned. Do I have to put the HFPlus.efi, edited conflig.plist, FakeSMC.kext and Voodoo kext the same way as I did with USB installer?

 

[RehabMan]

Do I have to put the HFPlus.efi, edited conflig.plist, FakeSMC.kext and Voodoo kext the same way as I did with USB installer?

Yes, of course.

 

[jsproule899]

Image of EFI/Clover not requested.

Attach actual EFI/Clover as ZIP (remove themes).

But from your image, it is clear you didn't follow the guide. Read post #1. Carefully.

sorry here is the .zip
i have read post 1 but can't see what I've done wrong?

now getting this?

 

[masud.xen]

Yes, of course.

Ok. Worked!

 

[RehabMan]

sorry here is the .zip
i have read post 1 but can't see what I've done wrong?

now getting this?
View attachment 199506

drivers64UEFI is missing OsxAptioFixDrv-64.efi.

Clover/kexts/Other is not per guide. FakeSMC is not the kext linked from the guide. All 'sensor' kexts should be removed. GenericUSBXHCI.kext is not recommended and should be removed. You're missing VoodooPS2Controller.kext, which is required if you plan to use the built-in trackpad/keyboard.

Make sure you set DVMT-prealloc as described in the FAQ.

 

[jsproule899]

Sorted, thanks for your help

 

[masud.xen]

I get occasional kernel panics when try to boot. And sometimes my system restarts automatically. Especially when it is not active for few minutes. Is it normal? Or is there a problem?