[Guide] Booting the OS X installer on LAPTOPS with Clover

[PabloLi]

Tried to start installation osx 10.14.6 on HP 13-an0031wm Pavilion i3-8145U 2 8GB RAM 128GB Sata
- clover 5033 / tried configs config_HD615_620_630_640_650_spoof / not spoof /just 630 with 14.1 or 15.2 smbios
- not much to change in bios, only secured boot and IntelVTD : disabled
- tried to remove patch with 32mb DVMT-prealloс in config
Anyway i do not understand the reason of stack except for "fatal error ae_not_found.."
if something wrong with ability to use i3-8145U or HP 13-an0031wm bios is not compatible?
Thank You !

 

[warty]

What terminal command(s) can be used to completely reformat a USB flash drive that was used to install macOS? I tried using, for example,

diskutil eraseDisk ExFAT Blank disk2

for flash drive mounted as /dev/disk2, but this leaves the EFI. What do I need to get rid of the EFI?

 

[kessinger]

When i try to boot from usb osx partition doesnt show up in clover.

 

[Feartech]

When i try to boot from usb osx partition doesnt show up in clover.

probably missing hfsplus.efi and /or apfsdriverloader.efi

 

[yota79]

I have problem to get the installation screen for mojave :

My notebook is:

Asuspro B9440UA
CPU : I5 5200U
RAM : 8GB
DISK : Nvme Sandisk 512MB
Video : HD620

I try to use also:

Mojave 10.14.6
Mojave 10.14.5
Mojave 10.14.3 ( now the other test with this version)

Clover EFI:

47xx by rehabman
48xx by sourceforge
5045 by sourceforge ( now i use this )
5085 cannot install on USB going to error

I use the config plist from rehabman repository for hd615_620_630:640:650.plist ( no spoof )

The install stuck after the verbose log with apple and a little start for the lane but remaining freezee ( I'm wait for 30minutes and the installation not progress)

Now, to verify if the osx start i try with verbose and also safe mode , but everytime i have the error:

error : cpu 2 caller
error : cpu 3 caller

and the system reboot

I have to do the installation from the usb-c to usb becouse the notebook doesen't have the usb directly.

I attach the EFI folder, becouse without the install I cannot take the log.

 

[Feartech]

I have problem to get the installation screen for mojave :

My notebook is:

Asuspro B9440UA
CPU : I5 5200U
RAM : 8GB
DISK : Nvme Sandisk 512MB
Video : HD620

I try to use also:

Mojave 10.14.6
Mojave 10.14.5
Mojave 10.14.3 ( now the other test with this version)

Clover EFI:

47xx by rehabman
48xx by sourceforge
5045 by sourceforge ( now i use this )
5085 cannot install on USB going to error

I use the config plist from rehabman repository for hd615_620_630:640:650.plist ( no spoof )

The install stuck after the verbose log with apple and a little start for the lane but remaining freezee ( I'm wait for 30minutes and the installation not progress)

Now, to verify if the osx start i try with verbose and also safe mode , but everytime i have the error:

error : cpu 2 caller
error : cpu 3 caller

and the system reboot

I have to do the installation from the usb-c to usb becouse the notebook doesen't have the usb directly.

I attach the EFI folder, becouse without the install I cannot take the log.

why NullCPUPowerManagement.kext? the guide doesn't say to use it

also remove those sensor kexts and realtekALC.kext

 

[yota79]

I try with and without. Now i Remove the ktext you tell me but on safe mode I have the same error :

error : cpu 2 caller

 

[Feartech]

I try with and without. Now i Remove the ktext you tell me but on safe mode I have the same error :

error : cpu 2 caller

boot verbose and take a pic to upload here

 

[yota79]

Here the error on safe mode start and verbose:

 

[Feartech]

Here the error on safe mode start and verbose:

View attachment 423460

you have 2 ApfsDriverLoader's in drivers/UEFI remove ApfsDriverLoader-64

drivers64 and drivers64UEFI folders should be removed

USBInjectAll.kext would be a good idea

try using the config.plist from the guide untouched, meaning don't make any changes