- Joined
- Aug 3, 2011
- Messages
- 181
- Motherboard
- HP ProBook 4540s-Clover
- CPU
- i7-3612QM
- Graphics
- HD4000, 1366x768
- Mac
- Mobile Phone
Last edited:
Okay so i solved the problem, previously i was using mac OS mojave 10.14.6 and then i switched over to version 10.14.3 and it worked i really have no idea why the other version didn’t work.Hey thanks for the reply i’ll try this too and maybe someone else could help.
Okay so i solved the problem, previously i was using mac OS mojave 10.14.6 and then i switched over to version 10.14.3 and it worked i really have no idea why the other version didn’t work.
use a later version of clover:Hey guys, I seem to be having an issue booting into the Mac OS installer for High Sierra (10.13.6) on my Asus UX305FA (Core M-5Y71, HD5300, 1920x1080). I am following this guide to the letter but here is the problem I am having:
When booting from the latest Rehabman clover fork (4701) and selecting verbose boot, everything seems to go smoothly and I get to a grey screen with a mouse cursor but immediately that screen is replaced with an Apple Logo and a progress bar that hasn't moved in the past 24 hours.
I am using the template config.plist file from Rehabman for HD5300 series GPUs and have changed my ProductName in the config.plist file to MacBook8,1 as it is the closest to the CPU I have.
I have tried countless different things in the config.plist file such as injecting a fake ig-platform-id, launching without CSM enabled, launching in single user mode, launching in safe mode (this one causes my laptop to just reboot after a few verbose boot messages) but nothing changes. I have been trying to follow another guide for my laptop for installing High Sierra (linked here) as well with regards to BIOS settings but since it is a bit outdated, I don't know how reliable it is. I don't know what could be causing the issue but I suspect maybe it is either USB or iGPU related.
There is no issue with verbose boot as it passes by so I can't attach a screenshot of it but I am attaching my Clover folder in case there is something wrong there that I am doing. Hopefully someone can help.
JUST A NOTE THAT I HAVE TRIED MOJAVE AS WELL AND SAME RESULT
Thanks
use a later version of clover:
Clover UEFI Boot Mode v2.4k r4961
Installs Clover bootloader for UEFI booting only to the EFI System Partition of the selected destination drive. Installs AptioMemoryFix.efi, PartitionDxe-64.efi and ApfsDriverLoader-64.efi in /EFI/CLOVER/Drivers64UEFI/. Includes CustoMac default...www.tonymacx86.com
boot verbose and then take a picThanks for the reply. However, it didn't solve the problem. Using the same Kexts from the my linked Clover zip file and using the same config.plist file, using the linked Clover installer still causes the same issue.
Anything else I could check or try?
boot verbose and then take a pic
make sure to use a USB2.0 stick and try each port on your laptop