[Guide] Asus Zenbook UX360CA Skylake Mojave 10.14 Clover UEFI

Not open for further replies.
Oct 12, 2018
Gigabyte Aero 15X - Clover
HD 630, 1920 x 1080

  • Laptop Configuration
This guide is for clean installation of Mojave 10.14 on Asus Zenbook Flip UX360CA (Skylake Core m3-6Y30). It comes with 8gb of ram. I am running the latest BIOS version 3000. It has iGPU Intel HD515 and no dGPU. It also has Intel 8260 network card and Microsoft Precision Touchpad.​

  • What I got working
Nvram, Full Graphics QE/CI, Keyboard, Sound (Speakers, Jack, Mic), Screen Brightness Control, Battery Indicator, Touchpad, App Store​

  • BIOS Settings
Wake on Lid Open -> Disabled
Intel Virtualization Technology -> Enabled
Intel AES-NI -> Enabled
Vt-d -> Disbaled
Graphics Configuration -> DVMT Pre-Allocated -> 64M
USB Configuration -> Legacy USB Support -> Enabled
Fast Boot -> Disabled
Launch CSM -> Disabled
Secure Boot Menu -> Secure Boot Control -> Disabled​

  • Preparing USB Bootable Media
I used the following guide by RehabMan to create the bootable installation media :

Kexts used : FakeSMC, VoodooPS2Controller, USBInjectAll, Lilu, WhateverGreen
Config.plist used : config_HD515_520_530_540.plist​

  • Installing MacOS
Use the same Rehabman's guide listed in the previous section to wipe the SSD clean and install MacOS Mojave. This time you need to refer post #2 and "Notes on HDD install" in post #1. Once Clover is installed in the SSD, laptop should boot without the flash drive. At this point in time, you should have Graphics (QE/CI), Nvram, Keyboard, USB ports (both USB 2 & 3) working. I am using TPLink TL-WN725N USB WiFi adapter for wifi since the Intel 8260 wifi card is not going to work in MacOS. For me, the wifi experience is nice so I did not replace the Intel card, although it can be replaced by a compatible card to get it working in MacOS.​
  • Getting Sound Working
I installed VooDooHDA and got the speakers, headphone jack and mic working.​
  • Getting Brightness Control Working
I followed RehabMan's guide to get the Screen Brightness Controls working through System Preferences :

Once, the Brightness Controls are working in System Preferences, I remapped the keys to Increase/Decrease display brightness through System Preferences -> Keyboard -> Shortcut -> Display to F5 and F6.​
  • Getting Battery Status Working
You will need to learn how to patch your laptop's DSDT.aml . Read this guide :

What I did was patched the following Asus-N55SL patch in my DSDT :

...and installed the ACPIBatteryManager.kext to /L/E that can be downloaded from here :
  • Getting Touchpad Working
This can be iffy. I installed VooDooI2C+HID kexts in poling mode along with the recommended DSDT patches :
Apparently, GPIO mode will not work owing to Asus's buggy implementation

I also disabled AppleIntelLPSSI2C and AppleIntelLPSSI2CController kexts by including coolstar's 2 patches in my config.plist :

I also had to disable the touchscreen. Honorable mention to cowcowpod's guide (it is for sky lake though) :
I used SSDT-XSTA.aml from the guide and also included the TPL0_STA>XSTA rename patch in my config.plist/ACPI/DSDT/patches​
Last edited:
Aug 10, 2019
hp 6300
nvidia gtx 750ti
Hi. I've got a Zenbook UX305CA with same Skylake Core m3-6Y30. I'm going to try to install Mojave. Can you please post here your config files? Thanks
Not open for further replies.