[Guide] ASUS Zenbook UX310UA (& UX310UQK) macOS Mojave / Catalina with Clover (& Big Sur using OpenCore EFI) Installation Guide

[ChriswiththeBeard]

try resetting NVRAM

I just did that, now it is booting again, thanks for your help !

 

[ChriswiththeBeard]

Im able to boot windows 10 from opencore 0.6.4.

I installed Windows after I installed MacOS, but on a separate m.2 SSD, and it boots perfectly into windows or MacOS

and with your EFI folder i can not boot Windows From the OpenCore Menu so i will try to fix that this weekend

 

[yokocortez25]

They do indeed, at least ASMC and FNKEYS. Try disabling them and you lose brightness control.
Modifying ASMC, I got the Keyboard Backlight widget to show when hitting Fn+F3-F4, but unfortunately no light. I also got Fn+F1 (sleep) and Fn+F2 (Airplane mode) to work.

Please try with the attached EFI folder
If that doesn't work you try with the KabyLake config (also attached). It's the one that works with my setup
Good luck!

anyone know how to enable Hyper-Threading, how does this work in bigsur. I only see two cores but I should have others with H-Threading as in windows

 

[brunogermain]

@yokocortez25 can you post your IOReg?

 

[brunogermain]

and with your EFI folder i can not boot Windows From the OpenCore Menu so i will try to fix that this weekend

Post results if you succeed!
The SSDT in my efi folder lacks “If (_OSI (“Darwin”))” conditions. This is what bothers Windows.
I tried to correct it, but since I rarely use Windows, booting from BIOS was good enough for me

 

[yokocortez25]

@yokocortez25 can you post your IOReg?

Is this?

 

[yokocortez25]

Is this?

@brunogermain, you see something?

 

[brunogermain]

@brunogermain, you see something?

your PM is working correctly.
see this: https://dortania.github.io/OpenCore-Post-Install/universal/pm.html#enabling-x86platformplugin and compare it to your IOReg's screenshot

 

[yokocortez25]

your PM is working correctly.
see this: https://dortania.github.io/OpenCore-Post-Install/universal/pm.html#enabling-x86platformplugin and compare it to your IOReg's screenshot

Thanks, then I'll leave it alone

 

[velislav25]

They do indeed, at least ASMC and FNKEYS. Try disabling them and you lose brightness control.
Modifying ASMC, I got the Keyboard Backlight widget to show when hitting Fn+F3-F4, but unfortunately no light. I also got Fn+F1 (sleep) and Fn+F2 (Airplane mode) to work.

Please try with the attached EFI folder
If that doesn't work you try with the KabyLake config (also attached). It's the one that works with my setup
Good luck!

Thanks to brunogermain for the EFI folder, I was struggling to install Big Sur on my UX310UAK, and this has finally enabled me to install it.
P.S. I have just changed the default language using OpenCore Configurator.