[Guide] ASUS Zenbook UX310UA (& UX310UQK) macOS Mojave / Catalina with Clover (& Big Sur / Monterey using OpenCore EFI) Installation Guide

[ChriswiththeBeard]

Dear @Feartech,

Thanks for the tip about the "igfxonln=1"bootarg. I can confirm this also works like a charm on a UX310UA with an i3-6100U to enable the HDMI monitor on boot and resume after sleep.
I also added "igfxfcms=1" after reading through the list of WhatEverGreen bootargs, and now the built-in display is also active at boot. This is apparently required only for SkyLake.
I now have three active displays (built-in, HDMI port and USB-C) on boot and on resume. Very nice!

I use my 4k monitor (via usb c to dp)
sometimes when I have to finish some school work on my laptop. But a lot of the times, my external monitor stays black, but macOS recognizes the external 4k LG monitor.

If I read your post correctly, you had similar problems ?

 

[ChriswiththeBeard]

It still running like a dream on macOS 13.0 Ventura (with 12gb ram) I am using a HP G5 Thunderbolt dock to drive a 34" 1440p screen. I also have ethernet and all the USB periphials working via the dock.