Contribute
Register

[Guide] ASUS ZENBOOK UX305FA using Clover UEFI

Status
Not open for further replies.
Hello guys, I'm a new member for this site and a "Elementary user".....
Thank you for your efforts~
I'll follow this Guide and try to do,
but stuck in one of the step in this guide........
When I use the bootable Clover EFI usb stick and start to boot OS X from this usb stick,
it stuck at the bar get on almost 1/4,then I choose "verbose mode",it still stuck by some message...
(see attachments),


so what can I do to install the Mac OS X in my ASUS UX305FA?

ps1.my ASUS UX305FA SPEC:
Core-M 5Y70/8G RAM/256GB SSD/HD5300/QHD(3200X1800)

Thanks~

Post EFI/Clover folder you're using.
 
Post EFI/Clover folder you're using.

Thanks RehabMan~
this is my EFI/Clover folder~
(see attachments)
???? 2015-07-07 ??12.08.41.png???? 2015-07-07 ??12.09.34.png
 
Thanks RehabMan~
this is my EFI/Clover folder~
(see attachments)
View attachment 143231View attachment 143232

Not a photo. ZIP the folder, post as attachment.

Also...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
 
Not a photo. ZIP the folder, post as attachment.

Also...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Sorry, my fault, I'll try to correct it...
and the zip file attached..
THX~
 

Attachments

  • CLOVER_pcf.zip
    3.3 MB · Views: 205
Sorry, my fault, I'll try to correct it...
and the zip file attached..
THX~

I'll wait for specs (in your profile).
 
UHD, 3200X1800 on a 13 inch screen is just crazy.

But I think this is the only way to have a touch screen on this laptop.

Still, even on 1920/1080 on this 13 screen, I increase Firefox's font in order to not hurt my eyes, which are both 10/10.

You're probably gonna need it big time, no matter what OS, so here's how to do it :

In Firefox Type "about:config", press yes.

Then look for "layout.css.devPixelsPerPx" and change it from -1.0 to anywhere you like, I use 1.2 but you probably gonna need 1.5 / 2.0.

Another info, for people installing for the first time, if you plan to dual or triple boot OSX with Windows and Linux, always start with OSX of course but make all different partition HFS+ in disk utility. If you make a partition fat32 from OSX Diskutility, windows will consider the whole thing MBR and won't install.
 
UHD, 3200X1800 on a 13 inch screen is just crazy.

It is pixel doubled/scaled. So, effective resolution is 1600x900 which is quite reasonable for 13".
 
It is pixel doubled/scaled. So, effective resolution is 1600x900 which is quite reasonable for 13".

Defenetly better than 1920x1080 then, even tho it's still 16/9; when mac are 16/10 I think which is better for a computer IMO.

It's defenetly utter BS tho. People buy more, when they have less, when it's actually better... :beachball:
 
Status
Not open for further replies.
Back
Top