[Guide] ASUS ZenBook Pro UX501JW High Sierra 10.13.5 using Clover UEFI

[RehabMan]

Thanks for reply, I used old copy on macbook pro with UniBeast 8.3.2, should i use 10.13.6 ?
EDIT:
I've downloaded 10.13.2 from app store.

Unibeast not used with laptops.

See laptop guide and laptop FAQ:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[FAROUK60]

Hi! Should this guide work for UX501VW model too? (i7-6700HQ - Intel® HD 530)
Thank you!!

Yes its working, i have the same, just the nvidia gpe and the wifi not working

 

[Feartech]

Yes its working, i have the same, just the nvidia gpe and the wifi not working

nvidia and stock wifi won't work


As per rules, please update your hardware profile to allow others to help you easier
https://www.tonymacx86.com/account/

please read the faq for proper hardware profile setup:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[FAROUK60]

nvidia and stock wifi won't work


As per rules, please update your hardware profile to allow others to help you easier
https://www.tonymacx86.com/account/

please read the faq for proper hardware profile setup:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

yes not working
for the wifi you should use an USB wifi or you should change your wifi card by this one https://www.amazon.com/dp/B00HRFS1GQ/?tag=tonymacx86com-20

 

[Njel]

yes not working
for the wifi you should use an USB wifi or you should change your wifi card by this one https://www.amazon.com/dp/B00HRFS1GQ/?tag=tonymacx86com-20

I have the same laptop but I am stuck when booting from the USB drive.
I followed both guides (this one and the more generic one for laptop).
I experimented adding and removing some of the kexts files and I am getting a bit further but the PC automatically reboots now after a few minutes try to load the install. It could be because of the fact that this laptop has both Intel HD530 Graphic and a nVidia GTX 960M.

So could you please post your config.plist and the list of kexts and drivers you have on your USB drive to be able to boot? The Clover options used to boot would also be useful.

Thanks

Update:
I was able to install Mojave finally by removing the additional 8GB Memory stick in the laptop.
I would like to know now if anybody has been able to get the resolution higher than 1024x768. If so I would really appreciate some help or direction to where to start.

Thanks

Update:
Got it to work full resolution by using Whatevergreen. Thanks all for creating all those tools and drivers. It has never be easier to create an Hackintosh.
I also used AppleALC to get the sound working.
I still need to figure out the trackpad and the battery/power stuff...

Thanks

 

[woofsri]

I know this is old but I followed the guide, and the install worked, but when rebooting without the USB during Post-Install, it hangs on "busy timeout[0], (60s): AppleACPICPU" and doesn't boot past it.

 

[Feartech]

I know this is old but I followed the guide, and the install worked, but when rebooting without the USB during Post-Install, it hangs on "busy timeout[0], (60s): AppleACPICPU" and doesn't boot past it.

means your clover needs an update