[Guide] Asus ROG GL502VS (Skylake, i7-6700HQ, GTX 1070) Sierra 10.12.4

[safar46]

Hi,
I have a GL502VM and I followed your post and I couldn't get to work:

Keyboard Back Light -> error adding in this line "^^PCI0.LPCB.EC0.WRAM (0x04B1, Local1)"

Keyboard Function keys -> only Sound is working

Trackpad -> still not detected

Internal Mic not avaliable, only show digital Mic.

Battery usage and shutdown ok.

Can you help me?

Thanks.

For sound work you need determine what ALC version of your laptop, GL502VS use ALC255.

Use this app https://github.com/Mirone/AppleHDAPatcher. then see in app console it will show what your ALC version. Before use this app you need to remove EFI/Clover/kexts/Other/AppleALC.kext temporary (and reboot)

attach your DSDT here for other fixes. i will help

It's fine, thank you. I just delete the line with the error and everything working well (for the moment...)

However, VoodooI2C.kext don't working... It just reboot again and again (I started on the PC partition to replace the kext like before)

attach your DSDT here

 

[sentry-music]

Ethernet

Ethernet working for me

 

[barsuke]

For sound work you need determine what ALC version of your laptop, GL502VS use ALC255.

Use this app https://github.com/Mirone/AppleHDAPatcher. then see in app console it will show what your ALC version. Before use this app you need to remove EFI/Clover/kexts/Other/AppleALC.kext temporary (and reboot)

attach your DSDT here for other fixes. i will help



attach your DSDT here

1. No sound. In the properties of the system there is sound, even a microphone judging by the system settings (input level) the microphone works. Tried AppleHDAPatcher,
Vendor: ONBOARD
Name: Realtek ALC255
Codec: 0x10ec0255

2. Nvidia web drivers doesn't work after installing and activating. I tried this https://www.tonymacx86.com/threads/solving-nvidia-driver-install-loading-problems.161256/ - same.

3. VoodooI2C.kext don't working. In your archive VoodooI2C.kext has zero size. So i tried kext from https://www.tonymacx86.com/threads/wip-voodooi2c-i2c-trackpad-limited-support.204227/

- Without success - kernel panic.

4. System shows only 4 gb of ram, but really 12gb. (FIXED) Clover Configuration -> SMBIOS (attachment)

 

[sentry-music]

attach your DSDT here

Done

 

[safar46]

1. No sound. In the properties of the system there is sound, even a microphone judging by the system settings (input level) the microphone works. Tried AppleHDAPatcher,
Vendor: ONBOARD
Name: Realtek ALC255
Codec: 0x10ec0255

2. Nvidia web drivers doesn't work after installing and activating. I tried this https://www.tonymacx86.com/threads/solving-nvidia-driver-install-loading-problems.161256/ - same.

3. VoodooI2C.kext don't working. Maybe need to patch DSDT before using this kext?

4. System shows only 4 gb of ram, but really 12gb. (FIXED) Clover Configuration -> SMBIOS (attachment)

1. are you installing kexts from system_kexts? i need kexcache output.

5a. Use Kext Wizard to install the kexts in the ROG_502_Sierra>system_kexts folder to System/Library/Extensions.

2. but it can boot or not?
3. not need, try using VoodooI2C.kext from attachment

Done

try using VoodooI2C.kext from attachment

 

[barsuke]

1. are you installing kexts from system_kexts? i need kexcache output.

Yes
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext
AppleHPM.kext - dependency 'com.apple.driver.AppleIntelLpssI2CController' not found.
AppleHPM.kext is missing dependencies (including anyway; dependencies may be available from elsewhere)
AppleHPM.kext - dependency 'com.apple.driver.AppleIntelLpssI2CController' not found.
AppleHPM.kext - dependency 'com.apple.driver.AppleIntelLpssI2CController' not found.
Prelink failed for com.apple.driver.AppleHPM; omitting from prelinked kernel.
KernelCache ID: 095D3087610E48EA3173A56F8FD6A1CD

2. but it can boot or not?

Yes, system is boot. Nvidia Webdrivers not active.

3. not need, try using VoodooI2C.kext from attachment

With this kext i got kernel panic.

 

[sentry-music]

try using VoodooI2C.kext from attachment

The computer starting this time, but the touchpad still don't work

Edit : Don't boot anymore... boot again and again, like a loop...

 

[iamsanoj]

It is always a bad idea to use patched ACPI files from another computer.
Always patch your own.

hi @RehabMan I always screw up things when its come dsdt. But Thanks for all the suggestions from u and @safar46 I made it my self and now its booted up. Having a few issues . Keyboard and trackpad is Not working ..

 

[RehabMan]

Keyboard and trackpad is Not working ..

https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[ben9923]

With this kext i got kernel panic.

Did you verify which trackpad you have? You may do it with Windows Device Manager.
Please attach your original DSDT, your patched DSDT, a copy of IOReg and a picture of the KP.